Description
The
160mm underground drainage pipe 3m is a practical single-socket pipe for compatible below-ground foul-water and surface-water drainage systems. This
160mm single socket drainage pipe combines an easy-to-handle
3m underground drainage pipe length with durable
160mm PVC-U drainage pipe construction, making it suitable for larger
160mm sewer pipe and gravity drainage installations. The 3 metre length is easier to handle, transport and position than longer 6 metre pipe while still providing an efficient solution for larger underground drainage runs.
160mm Underground Drainage Pipe 3m
The
160mm underground drainage pipe 3m is designed for compatible non-pressure underground drainage and sewerage installations. Its 160mm nominal diameter makes it suitable for larger drainage layouts across domestic, commercial and groundwork projects.
Choosing 160mm Underground Drainage Pipe 3m
Choose the
160mm underground drainage pipe 3m where a manageable 3 metre pipe section is preferred for a 160mm drainage installation. The shorter length can be useful in restricted access areas, smaller excavations and drainage layouts where 6 metre pipe would be difficult to transport or position.
160mm Single Socket Drainage Pipe
The
160mm single socket drainage pipe has one integral socketed end and one plain spigot end. This allows successive compatible pipe lengths and fittings to be joined using the push-fit ring-seal connection without requiring a separate coupler at every joint.
Connecting 160mm Single Socket Drainage Pipe
Before joining the
160mm single socket drainage pipe, make sure the socket, seal and connecting pipe end are clean and free from grit or damage. Use suitable underground drainage lubricant where required and insert the prepared spigot squarely into the socket without displacing the sealing ring.
3m Underground Drainage Pipe
A
3m underground drainage pipe provides a useful balance between installation speed and ease of handling. The shorter length can be easier to manoeuvre on confined sites while still reducing the number of individual pipe sections needed compared with much shorter lengths.
Installing 3m Underground Drainage Pipe
The
3m underground drainage pipe should be evenly supported on suitable bedding and installed to the correct fall for the drainage system. Check the route, trench depth and connection positions before final assembly and backfilling.
160mm PVC-U Drainage Pipe
This
160mm PVC-U drainage pipe is designed for compatible non-pressure gravity drainage systems. PVC-U is widely used for underground drainage because it provides a lightweight, corrosion-resistant and easy-to-joint pipe system.
160mm PVC-U Drainage Pipe Applications
The
160mm PVC-U drainage pipe can form part of suitable systems including:
- Foul-water underground drainage
- Surface-water drainage
- Rainwater drainage systems
- Domestic groundworks
- Commercial drainage installations
- Drainage extensions and alterations
- Gravity sewer systems
160mm Sewer Pipe
A
160mm sewer pipe can be used within suitable gravity foul-water and drainage systems where a larger nominal pipe size is required. Correct pipe falls, bedding, jointing and maintenance access should be maintained throughout the complete installation.
Installing 160mm Sewer Pipe
When installing
160mm sewer pipe, make sure the pipe is adequately supported along its length and properly aligned with adjoining fittings. Inspection chambers and suitable access fittings should be incorporated where required by the drainage design.
Single Socket Pipe Connection
The integral socket contains a sealing ring for a push-fit connection with compatible underground drainage pipe and fittings. The opposite plain end can be inserted into another suitable socket or cut to the required length where necessary.
3m Pipe vs 6m Pipe
A 3m pipe is generally easier to transport, store and manoeuvre than a 6m pipe, particularly on smaller sites and restricted-access installations. A 6m length may reduce the total number of joints over long straight drainage runs, while the 3m option provides greater flexibility during installation.
Cutting 160mm Drainage Pipe
If the pipe needs shortening, make a clean square cut and remove any burrs from the cut end. Chamfer the prepared spigot where required before inserting it into a socket to help protect the sealing ring.
Pipe Bedding and Support
Underground drainage pipe should be evenly supported within the trench using suitable bedding material. Avoid placing sharp stones or unsuitable backfill directly against the pipe and follow the relevant installation requirements for the ground conditions and drainage design.
BS EN 1401 Underground Drainage
160mm PVC-U drainage pipes of this type are used within systems manufactured to BS EN 1401-1 for non-pressure underground drainage and sewerage. Always check compatibility where pipe and fittings from different drainage systems are being combined.
160mm Underground Drainage Pipe 3m Applications
The
160mm underground drainage pipe 3m is suitable for compatible applications including:
- 160mm underground drainage
- Foul-water drainage
- Surface-water drainage
- Rainwater drainage
- Domestic groundworks
- Commercial drainage projects
- Gravity sewer systems
- Drainage repairs and extensions
- Restricted-access drainage installations
160mm Underground Drainage Pipe 3m Key Features
- Nominal diameter: 160mm
- Pipe length: 3 metres
- Single socket configuration
- One socket end and one plain spigot end
- Push-fit ring-seal connection
- PVC-U construction
- Suitable for compatible non-pressure gravity drainage
- Suitable for foul-water systems
- Suitable for surface-water systems
- More manageable than a 6m pipe length
Shop 160mm Underground Drainage
Browse our complete
160mm Underground Drainage range for pipes, bends, branches, couplers, reducers and access fittings. You can also browse the wider
Underground Drainage range for additional pipe sizes, inspection chambers and drainage fittings. The
160mm underground drainage pipe 3m combines a convenient
160mm single socket drainage pipe connection with a manageable
3m underground drainage pipe format, durable
160mm PVC-U drainage pipe construction and suitability for compatible
160mm sewer pipe installations.
