Description
The
160mm 45 degree single socket bend provides a controlled change of direction within compatible underground drainage systems. This
160mm underground drainage bend combines a practical
45 degree drainage bend angle with a
single socket drainage bend connection and durable
160mm PVC-U drainage bend construction for foul-water and surface-water pipework. The fitting uses one integral socket and one plain spigot end, allowing it to connect efficiently into compatible 160mm underground drainage runs.
160mm 45 Degree Single Socket Bend
This fitting is designed where a 160mm underground drainage pipe needs to change direction through 45 degrees. The angle provides a useful intermediate change between shallower 15° or 30° fittings and near-right-angle bends.
Choosing a 160mm 45 Degree Single Socket Bend
Choose this fitting where the surrounding drainage layout suits one socket connection and one plain spigot end. If socket connections are required at both ends, a double-socket 45° bend may be more suitable.
160mm Underground Drainage Bend
The
160mm underground drainage bend is suitable for compatible larger-diameter gravity drainage systems. 160mm pipework is commonly used across larger domestic, commercial and groundwork projects where increased drainage capacity is required.
160mm 45 Degree Single Socket Bend Installation
Before installation, check that the socket, sealing ring and adjoining pipe or fitting surfaces are clean and free from grit or damage. Use suitable underground drainage lubricant where required and insert the prepared spigot squarely into the socket without disturbing the sealing ring.
45 Degree Drainage Bend
A
45 degree drainage bend provides a controlled directional change while helping maintain a smooth route through the underground drainage system. This angle is useful where drainage pipe needs to follow a trench route, avoid an obstruction or align with another section of pipework.
Using a 45 Degree Drainage Bend
When positioning the
45 degree drainage bend, consider the direction of flow, required pipe fall and available installation space. The fitting and surrounding pipework should be properly aligned and supported before backfilling.
Single Socket Drainage Bend
The
single socket drainage bend has one integral push-fit socket and one plain spigot end. The socket accepts compatible plain-ended pipe, while the spigot can be inserted into another suitable drainage socket, coupler or fitting.
160mm 45 Degree Single Socket Bend Connections
Check that the ring seal is correctly seated before assembly and keep all jointing surfaces clean. The plain spigot connection should enter the adjoining socket squarely rather than being forced into alignment.
160mm PVC-U Drainage Bend
This
160mm PVC-U drainage bend is designed for compatible non-pressure underground drainage systems. PVC-U provides a lightweight, durable and corrosion-resistant solution widely used for foul-water, surface-water and rainwater drainage.
160mm PVC-U Drainage Bend Applications
The
160mm PVC-U drainage bend can form part of suitable domestic, commercial and groundwork drainage installations where a 45° directional change is required.
Single Socket vs Double Socket Bend
A single-socket bend has one socket and one plain spigot end. A double-socket bend has sockets at both ends and can accept compatible plain-ended drainage pipe on either side. Select the connection arrangement that best matches the surrounding pipe and fittings.
45° Bend vs 30° Bend
A 45° bend creates a greater directional change than a 30° fitting. Choose the 45° option where the drainage route needs a more noticeable turn, while a 30° bend is better suited to a shallower adjustment.
45° Bend vs 90° Bend
A near-90° bend creates a much sharper directional change than a 45° fitting. Where the drainage route can be achieved using the shallower angle, a 45° bend provides a more gradual transition.
Push-Fit Ring Seal Connection
The socket uses an integral ring seal for straightforward push-fit assembly with compatible underground drainage components. Keep the socket, seal and adjoining pipe surfaces clean and use suitable drainage lubricant where required.
BS EN 1401 Underground Drainage
160mm PVC-U bends of this configuration are used within underground drainage systems manufactured to BS EN 1401 for non-pressure underground drainage and sewerage. Always check compatibility where pipe and fittings from different underground drainage systems are being combined.
Preparing 160mm Drainage Pipe
If drainage pipe needs to be cut before installation, make a clean square cut and remove any burrs from the prepared end. Chamfer the edge where required before insertion to help protect the sealing ring during assembly.
Bedding and Support
The bend and adjoining pipework should be evenly supported using suitable underground drainage bedding. Avoid leaving the fitting suspended between unsupported pipe sections, as movement after backfilling can place unnecessary stress on the joints.
160mm 45 Degree Single Socket Bend Applications
This fitting is suitable for compatible applications including:
- 160mm underground drainage
- Foul-water drainage
- Surface-water drainage
- Rainwater drainage
- Domestic groundworks
- Commercial drainage systems
- Drainage repairs and alterations
- New underground drainage installations
160mm 45 Degree Single Socket Bend Key Features
- Nominal size: 160mm
- Bend angle: 45°
- Single socket configuration
- One socket and one plain spigot end
- Push-fit ring-seal joint
- PVC-U underground drainage fitting
- Suitable for compatible non-pressure gravity drainage
- Suitable for foul-water drainage
- Suitable for surface-water drainage
Shop 160mm Underground Drainage
Browse our complete
160mm Underground Drainage range for pipes, bends, branches, couplers, reducers and access fittings. You can also browse our wider
Underground Drainage range for additional pipe sizes, inspection chambers and drainage accessories. The
160mm 45 degree single socket bend combines a practical
160mm underground drainage bend design with a controlled
45 degree drainage bend angle, convenient
single socket drainage bend connection and durable
160mm PVC-U drainage bend construction.
