Description
The
VIPSeal VE050-60 flexible coupling is a versatile
50mm flexible pipe coupling for joining and repairing compatible plain-ended pipework. This
50-60mm flexible coupling is commonly used as a
50mm waste pipe connector and provides a practical
flexible PVC repair coupling for suitable waste, soil, vent and low-pressure drainage applications. The VE050-60 accepts compatible pipe outside diameters from 50mm to 60mm. Its flexible straight-coupling design makes it particularly useful for repairs, alterations and maintenance where a conventional rigid socket is unsuitable or difficult to install.
VIPSeal VE050-60 Flexible Coupling
The
VIPSeal VE050-60 flexible coupling is the genuine product reference for this 50–60mm straight coupling within VIPSeal’s earlier flexible PVC sanitary coupling range. The
VIPSeal VE050-60 flexible coupling is commonly described as a 50mm or 2 inch fitting, although actual pipe outside diameter should always be checked before installation.
Choosing the VIPSeal VE050-60 Flexible Coupling
Choose the
VIPSeal VE050-60 flexible coupling where both pipe outside diameters fall between 50mm and 60mm. Measure both pipe ends before ordering rather than relying solely on nominal descriptions such as 50mm or 2 inch, particularly where older or different pipe materials are being connected.
Installing the VIPSeal VE050-60 Flexible Coupling
Before fitting the
VIPSeal VE050-60 flexible coupling, clean both pipe surfaces and remove dirt, grease, burrs and loose material. Position the coupling centrally across the joint and tighten both stainless-steel clamp bands evenly. Published technical information for this flexible PVC range specifies a tightening torque of
6Nm.
50mm Flexible Pipe Coupling
The VE050-60 is commonly used as a
50mm flexible pipe coupling for compatible waste, soil, vent and drainage pipework. A
50mm flexible pipe coupling offers greater tolerance than a rigid system-specific socket because it accommodates compatible pipe outside diameters throughout the stated 50–60mm range.
50mm Flexible Pipe Coupling Applications
The
50mm flexible pipe coupling is particularly useful for repair and refurbishment jobs where plain-ended pipe sections need to be joined without rebuilding a larger section of the surrounding system.
50-60mm Flexible Coupling
The
50-60mm flexible coupling is selected according to actual pipe outside diameter. Both ends of this straight coupling cover the same 50–60mm range. This makes the
50-60mm flexible coupling useful where compatible pipes have small differences in their external dimensions.
Selecting a 50-60mm Flexible Coupling
Both pipe ends should sit comfortably within the 50–60mm range. If either pipe falls outside this range, select another coupling or a stepped adaptor rather than forcing the VE050-60 onto unsuitable pipework.
50mm Waste Pipe Connector
The VE050-60 can be used as a
50mm waste pipe connector for compatible plain-ended waste and low-pressure pipe systems. A
50mm waste pipe connector of this type can be especially useful during repairs, alterations and refurbishment work where a rigid fitting cannot easily be installed.
Using a 50mm Waste Pipe Connector
When using the fitting as a
50mm waste pipe connector, always check the actual pipe outside diameter and make sure the surrounding pipework is adequately supported. This helps avoid excessive movement or strain being transferred into the flexible joint.
Flexible PVC Repair Coupling
The legacy VE050-60 is manufactured as a
flexible PVC repair coupling using thermoplastic flexible PVC. The
flexible PVC repair coupling can join compatible plain-ended pipework without solvent welding and can be especially useful where access is restricted or conventional rigid fittings are impractical.
Flexible PVC Repair Coupling Construction
The flexible PVC body conforms around compatible pipe surfaces while stainless-steel clamp bands mechanically secure both ends of the fitting. This construction allows the
flexible PVC repair coupling to be used for permanent or temporary repairs where appropriate.
Pipe Repair and Maintenance
The VE050-60 can be useful where a damaged section of pipe needs to be removed and replaced with a short new length. Once sound plain pipe ends have been prepared, the coupling can bridge the joint and provide a flexible mechanical connection without needing a moulded socket.
Compatible Pipe Materials
Published information for the VIPSeal flexible PVC straight-coupling range lists compatibility with suitable pipe materials including:
- Plastic pipe
- Cast iron pipe
- Ductile iron pipe
- Steel pipe
- Copper pipe
- Lead pipe
Actual outside diameter and application suitability remain more important than the material description alone.
0.6 Bar Pressure Rating
Published technical data for this VIPSeal flexible PVC coupling range gives a pressure rating of
0.6 bar / 8.7psi. The VE050-60 is intended for suitable low and non-pressure waste, soil, vent and drainage applications rather than general high-pressure water systems.
6Nm Tightening Torque
The published tightening torque for this flexible PVC straight coupling is
6Nm. Using a suitable torque-controlled tool helps ensure both clamp bands are tightened evenly and consistently.
Working Temperature Range
The published constant working temperature range for this legacy flexible PVC range is
-10°C to +38°C. Applications outside these operating conditions should be checked for suitability before installation.
86mm Coupling Width
Legacy VIPSeal dimensional information lists the VE050-60 straight coupling at approximately
86mm wide. This compact width can be useful where a flexible repair connection needs to be installed within a restricted area.
VE050-60 Repair Applications
The
VIPSeal VE050-60 flexible coupling can be useful for:
- 50mm waste pipe connections
- Joining compatible plain-ended pipes
- Waste pipe repairs
- Replacing damaged pipe sections
- Soil and vent pipe alterations
- Low-pressure drainage repairs
- Connecting short replacement lengths
- Maintenance and refurbishment work
Legacy VE Flexible Coupling Range
The VE050-60 belongs to VIPSeal’s earlier flexible PVC sanitary coupling range. It should therefore use the specification relevant to the VE product rather than automatically inheriting the material and operating figures of newer VIPSeal EPDM VDC or VIPSealPlumb products.
VIPSeal VE050-60 Flexible Coupling Key Features
- Genuine VIPSeal VE050-60 product reference
- Pipe outside-diameter range: 50–60mm
- Common nominal size: 50mm / 2 inch
- Coupling width: approximately 86mm
- Straight flexible coupling design
- Thermoplastic flexible PVC construction
- Stainless-steel clamp bands
- 0.6 bar / 8.7psi pressure rating
- 6Nm tightening torque
- -10°C to +38°C constant working temperature
- Suitable for compatible waste, soil, vent and low-pressure drainage applications
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible couplings, adaptors, end caps and specialist pipe repair fittings. For current manufacturer technical information, see the official
VIPSeal Product Documentation resource. The
VIPSeal VE050-60 flexible coupling provides a versatile
50mm flexible pipe coupling and
50-60mm flexible coupling for use as a practical
50mm waste pipe connector and dependable
flexible PVC repair coupling.
