Description
The
315mm level invert chamber base is a genuine
Pipelife 1195001684 Universal Access Junction designed for 110mm underground drainage systems. This
110mm access junction provides a highly flexible chamber arrangement, with Pipelife describing the product as a
6 way inspection chamber base capable of more than 16 connection configurations. Speedy Plastics commonly describes this product as a 5 inlet chamber base, while Pipelife’s manufacturer literature identifies the same 1195001684 component as an AJ 6 Way because it provides six 110mm socket positions in total. Blanking plugs allow unused positions to be closed, making it a versatile
universal drainage chamber base for a wide variety of pipe layouts.
315mm Level Invert Chamber Base
The
315mm level invert chamber base forms the lower section of Pipelife’s Universal Access Junction system. Its single-level flow arrangement is designed to maintain a clear drainage route through the chamber while providing access for inspection and rodding. Pipelife specifically highlights the single-level flow design as a feature intended to minimise the risk of drainage blockage. This makes the chamber particularly useful where several underground drainage routes may need to be configured around one accessible inspection point. The exact manufacturer product catalogue lists the chamber body at 315mm diameter and approximately 210mm high.
Pipelife 1195001684 Universal Access Junction
Pipelife 1195001684 is the genuine manufacturer reference for the multi-purpose chamber base. Pipelife’s UK product literature identifies the component as the AJ 6 Way, while its current product catalogue describes the same article as a multifunctional 315mm inspection chamber base. Using the exact
Pipelife 1195001684 reference helps distinguish this base from the compatible 1196900475 chamber riser and 1195001686 square cover and frame. The system is designed so that one chamber base can accommodate numerous drainage layouts rather than requiring a different moulded base for every possible pipe direction.
110mm Access Junction for Underground Drainage
The
110mm access junction provides six socket positions for compatible 110mm underground drainage pipework. Pipelife’s exact product data identifies all six connection points as 110mm sockets positioned around the chamber base. This gives installers considerable flexibility when planning drainage runs entering and leaving the chamber. Unused connections can be blanked to create the required flow profile for the installation. The
110mm access junction is intended to provide access for inspection or rodding within non-pressure underground drainage and sewer pipe systems.
6 Way Inspection Chamber Base
Pipelife officially describes 1195001684 as a
6 way inspection chamber base. This refers to the six available 110mm connection positions around the chamber. Speedy Plastics has historically marketed the chamber as a 5 inlet base. Both descriptions refer to the same physical product, but the manufacturer terminology is useful when checking technical information or matching the chamber against Pipelife documentation. The six connection positions allow multiple possible flow arrangements, and Pipelife states that the Universal Access Junction provides more than 16 connection possibilities when used with the appropriate blanking arrangements.
1195001684 Connection Configuration
- 6 x 110mm socket connection positions
- 315mm nominal chamber diameter
- Approximately 210mm manufacturer-listed chamber height
- Single-level flow arrangement
- Blanking plugs for unused connections
- 16+ possible connection configurations
Universal Drainage Chamber Base
The
universal drainage chamber base has been developed to reduce the need for multiple chamber base configurations. Instead of stocking separate bases for different inlet directions, the Pipelife system provides several connection positions which can be configured to suit the underground drainage layout. This flexibility makes the
universal drainage chamber base useful for new drainage installations, extensions and projects where several pipe routes need to meet at a single inspection point. Before installation, plan the required flow direction and identify which connection positions will be used. Any unused positions should be correctly blanked using compatible Pipelife components.
Single-Level Flow Inspection Chamber
A key feature of the Pipelife Universal Access Junction is its level invert or single-level flow design. Rather than creating unnecessary steps within the drainage channel, the system is designed to maintain an efficient flow path through the chamber. Pipelife states that this design helps minimise the risk of drainage blockage while preserving access for inspection and rodding. This makes the
315mm level invert chamber base particularly suitable where maintaining a straightforward flow path is an important part of the underground drainage design.
Compatible Pipelife Chamber Components
The
Pipelife 1195001684 base forms part of a modular inspection chamber system. Compatible components include:
- 1195001684 Universal Access Junction chamber base
- 1196900475 315mm stackable chamber riser
- 1195001686 315mm square cover and frame
- Compatible Access Junction blanking plugs
The riser can be stacked where additional chamber height is required, while the cover and frame provide the finished access point at surface level.
Inspection and Rodding Access
The
110mm access junction is designed to preserve an accessible point within the underground drainage system. This allows pipe runs to be inspected, maintained or rodded where required without excavating the surrounding drainage system. Inspection chambers are particularly useful at drainage junctions and changes in pipe direction where future access may be required.
EN 13598 System Performance
Pipelife states that its Universal Access Junction components have been manufactured and tested against the performance requirements of EN 13598 for ancillary fittings used within non-pressure underground drainage and sewerage systems. I would retain that exact wording rather than describing the individual base simply as “certified to EN 13598”, because Pipelife’s UK literature describes the testing at system level.
Choosing the Correct Level Invert Chamber Base
Before ordering the
315mm level invert chamber base, check the drainage pipe size, required connection directions and compatibility with the proposed chamber riser and cover. The
6 way inspection chamber base uses 110mm connection positions throughout. It should not automatically be assumed compatible with nominally similar inspection chamber components from other manufacturers. The exact manufacturer code
Pipelife 1195001684 provides the most reliable way to identify this particular chamber base.
315mm Level Invert Chamber Base Key Features
- Genuine Pipelife Universal Access Junction
- Manufacturer reference 1195001684
- Pipelife designation: AJ 6 Way
- 315mm nominal chamber diameter
- Approximately 210mm manufacturer-listed height
- Six 110mm socket positions
- More than 16 possible connection arrangements
- Blanking system for unused connections
- Single-level flow design
- Designed to provide inspection and rodding access
- Compatible stackable riser and cover available separately
- System tested against EN 13598 performance requirements
Complete Your 315mm Level Invert Chamber
Browse our
315mm Level Invert Manhole Chambers range for the matching Pipelife chamber riser, square cover and other compatible inspection chamber components. For manufacturer system specifications and installation information, visit the official
Pipelife Universal Access Junction System page. The
315mm level invert chamber base provides a genuine
Pipelife 1195001684 110mm access junction with a flexible
6 way inspection chamber base design, making it a versatile
universal drainage chamber base for compatible underground drainage installations.
