Description
The
320mm round manhole cover is a genuine
Kayflow UG1000 component designed to complete a compatible Kayflow 320mm inspection chamber. Rated by Kayflow as a
15kN inspection chamber cover, it provides a removable
320mm chamber lid and frame arrangement for access to underground drainage systems. This
underground drainage access cover is designed for use with compatible Kayflow 320mm chamber bases and risers. The round cover allows the chamber to remain accessible for inspection, maintenance and rodding while providing the finished top section of the chamber assembly.
320mm Round Manhole Cover
The
320mm round manhole cover forms the upper access point of a compatible 320mm inspection chamber system. Once the required chamber depth has been achieved using the appropriate base and riser components, the cover and frame provide the finished access point at surface level. Kayflow manufactures its 320mm chamber bases, risers, lids and frames from polypropylene, creating a lightweight and durable modular inspection chamber system for underground drainage applications. The cover should always be correctly supported and installed in accordance with the requirements of the finished surface and the manufacturer’s guidance.
Kayflow UG1000 Cover & Frame
Kayflow UG1000 is the genuine manufacturer reference for the standard round cover and frame used with the Kayflow 320mm inspection chamber system. Kayflow also lists BUG1000 as the corresponding bulk product code. For a single product listing,
Kayflow UG1000 is therefore the correct manufacturer part number to use even where Speedy Plastics retains BUG1000 as its internal stock SKU. The manufacturer lists UG1000 with a pack quantity of one, while BUG1000 represents the bulk quantity.
15kN Inspection Chamber Cover
This
15kN inspection chamber cover has a manufacturer-stated loading of 1.5 tonnes / 15kN. The load rating must be considered when choosing where the chamber will be installed. A
15kN inspection chamber cover should only be used where the expected loading is appropriate for its manufacturer rating. If the chamber is positioned in an area exposed to vehicles, heavier traffic or other significant loads, the project specification should be checked before installation and a higher-rated cover selected where required. The loading figure describes the cover’s rated capacity and should not be confused with the physical weight of the product.
320mm Chamber Lid for Inspection Access
The
320mm chamber lid provides removable access to the drainage chamber below, allowing underground drainage runs and junctions to be inspected or maintained when required. Using a compatible
320mm chamber lid is important because the cover and frame must match the dimensions and arrangement of the corresponding chamber system. The UG1000 is designed for the Kayflow 320mm inspection chamber range.
Underground Drainage Access Cover
As an
underground drainage access cover, the UG1000 sits at the top of the inspection chamber while allowing future access to the underground drainage system. A properly positioned
underground drainage access cover can make future inspection, rodding and maintenance significantly easier because the chamber remains accessible without disturbing the surrounding underground pipework.
Compatible Kayflow 320mm Inspection Chamber System
The UG1000 is designed to work with compatible Kayflow 320mm inspection chamber components. These include the UG1004 chamber base, UG1002 riser and UG108 riser sealing ring. Kayflow states that its 320mm inspection chamber system uses 110mm drainage connections and can be installed to a maximum system depth of 600mm when fitted in accordance with the manufacturer’s guidance. The
320mm round manhole cover completes the top of this modular system after the base and any required risers have been installed.
Choosing the Correct 320mm Round Manhole Cover
Before ordering a
320mm round manhole cover, check the chamber manufacturer, chamber diameter and required load rating. The UG1000 is specifically intended for compatible Kayflow 320mm chamber components and has a 15kN manufacturer load rating. The
Kayflow UG1000 should not be confused with alternative square or higher-load cover options that may also be available for 320mm inspection chamber systems.
320mm Round Manhole Cover Key Features
- Genuine Kayflow inspection chamber component
- Manufacturer reference UG1000
- Designed for Kayflow 320mm inspection chambers
- Round cover and frame arrangement
- Manufacturer load rating: 1.5 tonne / 15kN
- Polypropylene construction
- Provides removable inspection and maintenance access
- Compatible with corresponding Kayflow 320mm chamber components
Complete Your 320mm Inspection Chamber
Browse our
110mm x 320mm manhole inspection chamber range for compatible chamber bases, risers, seals and cover options. You can also browse our
plastic manhole covers and frames for alternative sizes and load ratings. For current manufacturer information, see the official
Kayflow 320 Inspection Chambers range. The
320mm round manhole cover provides a genuine
Kayflow UG1000 solution where a
15kN inspection chamber cover, compatible
320mm chamber lid and reliable
underground drainage access cover are required.
