110mm Universal Waste Water Adaptor 32–55mm VIPSeal | VDA95

Description

The VIPSeal VDA95 waste adaptor is a flexible 110mm waste water adaptor designed to connect smaller waste pipework into compatible 110mm drainage connections. This 32-55mm waste pipe adaptor uses a practical cut to size waste adaptor design and is manufactured as an EPDM drainage adaptor for gravity drainage and sewerage applications. VIPSeal manufactures the VDA95 specifically for waste-pipe connections. The stepped opening can be trimmed to accommodate pipe outside diameters across the manufacturer’s stated 32–55mm working range, allowing one fitting to cover several common waste-pipe sizes.

VIPSeal VDA95 Waste Adaptor

The VIPSeal VDA95 waste adaptor is the genuine manufacturer product within VIPSeal’s Universal Adaptor range. It is designed to provide a flexible transition from smaller waste pipework into a compatible 110mm drainage pipe or suitable gully arrangement. The VIPSeal VDA95 waste adaptor should not be confused with the VDA96. VDA95 is intended for waste pipework, while VDA96 is designed for 65mm square and 68mm round rainwater downpipes.

Choosing the VIPSeal VDA95 Waste Adaptor

Choose the VIPSeal VDA95 waste adaptor where waste pipe with an outside diameter within the specified range needs to connect into compatible 110mm drainage. Always check the actual pipe outside diameter before cutting the adaptor.

110mm Waste Water Adaptor

The 110mm waste water adaptor provides the transition between smaller above-ground or external waste pipework and a compatible 110mm underground drainage connection. VIPSeal states that the adaptor can connect into 110mm drainage pipes or suitable gully traps. The receiving drainage route must be appropriate for the wastewater being discharged and should comply with the drainage design and applicable installation requirements.

Installing a 110mm Waste Water Adaptor

Before fitting the 110mm waste water adaptor, clean the receiving drainage connection and confirm the outside diameter of the smaller waste pipe. The adaptor should sit evenly within the compatible 110mm connection before the waste pipe is inserted.

32-55mm Waste Pipe Adaptor

The 32-55mm waste pipe adaptor is suitable across a useful range of smaller waste pipes. Common nominal applications include 32mm, 40mm and 50mm waste pipework, although the actual outside diameter should be checked rather than relying solely on nominal pipe size. VIPSeal’s product description states that the VDA95 can be cut to accommodate pipe diameters from approximately 32mm to 55mm. Its product sizing table separately identifies VDA95 as 110–35/55mm.

Using a 32-55mm Waste Pipe Adaptor

Before trimming the 32-55mm waste pipe adaptor, identify the correct cutting point for the pipe being connected. Start with the smallest suitable opening and remove only the section required for the measured pipe diameter.

Cut to Size Waste Adaptor

The main advantage of the VDA95 is its cut to size waste adaptor design. Rather than manufacturing a separate fitting for every waste-pipe diameter, VIPSeal uses a stepped flexible section that can be trimmed to suit the intended connection. A cut to size waste adaptor is particularly useful for drainage repairs, alterations and merchant stockholding because one fitting can accommodate several common pipe sizes.

Preparing the Cut to Size Waste Adaptor

When preparing the cut to size waste adaptor, make a clean, even cut at the appropriate step. Avoid cutting beyond the required section, as an oversized opening may prevent the adaptor fitting correctly around the waste pipe.

EPDM Drainage Adaptor

VIPSeal manufactures the VDA Universal Adaptor range from high-quality EPDM. This makes the VDA95 a flexible EPDM drainage adaptor rather than a rigid plastic reducer. The flexible EPDM construction allows the fitting to accommodate several compatible pipe materials and helps the adaptor conform around the inserted waste pipe.

Benefits of an EPDM Drainage Adaptor

An EPDM drainage adaptor provides flexibility where smaller waste pipe needs to transition into a significantly larger drainage connection. VIPSeal identifies its Universal Adaptors as suitable for gravity drainage and sewerage applications.

Typical VDA95 Applications

The 110mm waste water adaptor can be useful for applications including:

• 32mm waste pipe connections
• 40mm waste pipe connections
• 50mm waste pipe connections
• External waste-pipe alterations
• Utility and sink waste connections where appropriate
• Connections into compatible 110mm drainage
• Connections into suitable gully traps
• Drainage repairs and replacement work

Debris Protection

VIPSeal also states that the Waste Universal Adaptor can be used as a stopper to help prevent debris entering an unused drainage opening. This can be useful during construction or drainage alteration work where a connection needs temporary protection before the final pipework is installed.

VDA95 vs VDA96

Choose VDA95 for smaller waste-pipe connections in the approximately 32–55mm range. Choose VDA96 for rainwater applications using either 65mm square or 68mm round downpipe. Keeping these applications separate helps ensure that the correct VIPSeal Universal Adaptor is selected for the pipework being connected.

VIPSeal VDA95 Waste Adaptor Key Features

• Genuine VIPSeal Universal Adaptor
• Manufacturer part number: VDA95
• Designed for compatible 110mm drainage connections
• Manufacturer-stated waste-pipe working range: approximately 32–55mm
• Manufacturer size-table reference: 110–35/55mm
• Common applications include 32mm, 40mm and 50mm waste pipe
• Cut-to-size stepped opening
• High-quality EPDM construction
• Suitable for gravity drainage and sewerage applications
• Suitable for multiple compatible pipe materials
• Can also help prevent debris entering an unused drainage opening

Shop Flexible Drainage Connectors

Browse our Flexible Connectors range for flexible couplings, waste adaptors, rainwater adaptors, saddles and other underground drainage connections. For current manufacturer specifications, see the official VIPSeal Universal Adaptors product information. The VIPSeal VDA95 waste adaptor provides a flexible 110mm waste water adaptor for use as a 32-55mm waste pipe adaptor, versatile cut to size waste adaptor and durable EPDM drainage adaptor.