110mm Rainwater Adaptor Square/Round VIPSeal | VDA96

Description

The VIPSeal VDA96 rainwater adaptor is designed to connect either a 65mm square or 68mm round rainwater downpipe directly into compatible 110mm underground drainage. This flexible 110mm rainwater adaptor works as both a 65mm square downpipe adaptor and a 68mm round downpipe adaptor, providing a practical downpipe to underground drainage adaptor for surface-water drainage installations. VIPSeal manufactures the VDA96 from high-quality EPDM and specifically identifies it for connecting rainwater downpipes into 110mm drainage pipe or suitable gully traps. Its dual-size design means one fitting can accommodate two of the most commonly used domestic rainwater downpipe profiles.

VIPSeal VDA96 Rainwater Adaptor

The VIPSeal VDA96 rainwater adaptor is the genuine manufacturer reference for the rainwater version within VIPSeal’s VDA universal adaptor range. VIPSeal specifies VDA96 as 110–65/68mm, meaning it is designed around a 110mm drainage connection while accepting either a 65mm square or 68mm round rainwater downpipe. The VIPSeal VDA96 rainwater adaptor should not be confused with VDA95. VDA95 is intended for smaller 32–55mm waste pipes, while VDA96 is specifically designed for rainwater downpipes.

110mm Rainwater Adaptor

The 110mm rainwater adaptor provides a direct transition from common rainwater downpipes into compatible 110mm underground drainage systems. VIPSeal states that the VDA96 is suitable for direct connection into surface-water drains or appropriate gully traps from rainwater downpipes. Using the correct 110mm rainwater adaptor helps create a neat connection between above-ground rainwater systems and the underground surface-water drainage below.

Installing a 110mm Rainwater Adaptor

Before fitting the 110mm rainwater adaptor, check that the receiving drainage connection is appropriate for rainwater discharge and that the downpipe is either the compatible 65mm square or 68mm round size. The mating surfaces should be clean and free from grit and debris before assembly.

65mm Square Downpipe Adaptor

The VDA96 works as a 65mm square downpipe adaptor, allowing a standard square-profile rainwater pipe to connect into compatible 110mm underground drainage. This makes the 65mm square downpipe adaptor useful on domestic and commercial guttering installations where square downpipe needs to discharge directly into a surface-water drainage system or suitable gully.

Using the 65mm Square Downpipe Adaptor

Before installation, confirm that the square downpipe measures the compatible nominal 65mm size. The 65mm square downpipe adaptor should be positioned so the downpipe enters securely without distortion of the flexible EPDM fitting.

68mm Round Downpipe Adaptor

The same VDA96 fitting also works as a 68mm round downpipe adaptor. This allows one product to cover both of the common rainwater downpipe profiles without requiring separate adaptors. A 68mm round downpipe adaptor is useful where round rainwater pipe needs to transition neatly into compatible 110mm underground drainage or a suitable gully connection.

Using the 68mm Round Downpipe Adaptor

Check the outside profile and nominal size of the rainwater pipe before fitting. The 68mm round downpipe adaptor is specifically intended for the common 68mm round rainwater pipe size.

Downpipe to Underground Drainage Adaptor

Used as a downpipe to underground drainage adaptor, the VDA96 provides the transition between above-ground rainwater pipework and below-ground surface-water drainage. The downpipe to underground drainage adaptor can be used where rainwater is directed from roof guttering into an appropriate underground surface-water system or gully arrangement. Always make sure the receiving drainage route is intended for rainwater. Rainwater should not be connected into an unsuitable drainage system purely because a physical connection can be made.

EPDM Flexible Construction

VIPSeal manufactures the VDA universal adaptor range from high-quality EPDM rubber. The flexible construction allows the fitting to accommodate the different profiles used by square and round rainwater downpipes. VIPSeal also identifies its universal adaptors as suitable for gravity drainage and sewerage applications and for use across multiple compatible pipe materials.

Square or Round Rainwater Downpipes

The key advantage of the VIPSeal VDA96 rainwater adaptor is that one fitting can accommodate either:

• 65mm square rainwater downpipe
• 68mm round rainwater downpipe
• Compatible 110mm underground drainage connection

This dual-profile design can simplify stockholding and installation because the same VDA96 fitting covers both common domestic rainwater downpipe types.

Rainwater Drainage Applications

The downpipe to underground drainage adaptor can be used in suitable installations including:

• Roof rainwater drainage
• Domestic guttering systems
• 65mm square downpipe connections
• 68mm round downpipe connections
• Connections into compatible 110mm surface-water drainage
• Connections into suitable rainwater gullies
• Drainage repairs and alterations

Choosing the Correct VIPSeal Universal Adaptor

Choose VDA96 when connecting either a 65mm square or 68mm round rainwater downpipe into compatible 110mm drainage. For smaller waste-pipe connections from approximately 32–55mm into 110mm drainage, the corresponding VIPSeal product is VDA95 rather than VDA96.

VIPSeal VDA96 Rainwater Adaptor Key Features

• Genuine VIPSeal product
• Manufacturer reference: VDA96
• 110mm drainage connection
• Suitable for 65mm square downpipe
• Suitable for 68mm round downpipe
• EPDM construction
• Suitable for gravity drainage applications
• Designed for surface-water drainage connections
• Suitable for connection to compatible drainage pipe or gully traps
• One adaptor covers both common square and round rainwater profiles

Shop Flexible Drainage Connectors

Browse our Flexible Connectors range for rainwater adaptors, waste adaptors, flexible couplings and other underground drainage connections. You can also browse our Underground Soil, Waste & Rainwater Adaptors range for alternative pipe transition fittings. For current manufacturer information, see the official VIPSeal Universal Adaptors page. The VIPSeal VDA96 rainwater adaptor provides a versatile 110mm rainwater adaptor that works as both a 65mm square downpipe adaptor and 68mm round downpipe adaptor, creating a practical downpipe to underground drainage adaptor.