110mm Universal Waste Adaptor 32–55mm | Competa Drainage | CUG4UWA

Description

110mm Universal Waste Adaptor 32–55mm

This universal waste adaptor connects smaller waste pipework to a compatible 110mm underground drainage or surface water system. Its stepped flexible design can be carefully trimmed to suit waste pipes from approximately 32mm to 55mm. The economy adaptor provides a practical choice for everyday drainage, plumbing and repair work. In addition, its flexible construction helps form a close push-fit connection when installers cut and fit it correctly.

Universal Waste Adaptor Features

• Fits compatible 110mm drainage sockets
• Accepts waste pipes from approximately 32mm to 55mm
• Commonly used with 32mm, 40mm and 50mm waste pipe
• Stepped design can be trimmed to the required size
• Flexible push-fit construction
• Black drainage finish
• Suitable for external waste pipe connections
• Useful for surface water drainage connections
• Suitable for drainage repairs and alterations
• Practical economy option for trade and DIY installations

110mm Universal Waste Adaptor Specifications

Public brand	Competa Drainage
Product code	VDA95-1
Product type	Universal waste adaptor
Drainage connection	Compatible 110mm drainage socket
Waste pipe range	Approximately 32mm to 55mm
Common waste pipe sizes	32mm, 40mm and 50mm
Design	Stepped and trimmable
Connection method	Flexible push-fit
Colour	Black
Application	Waste pipe to underground or surface water drainage

Where Can You Use a Universal Waste Adaptor?

Use this adaptor to connect smaller waste pipework to a suitable 110mm drainage opening. For example, it can help connect waste from sinks, utility areas and other external waste pipework into an appropriate drainage point. The stepped opening covers several common pipe sizes. Therefore, installers can trim the fitting to suit the required connection instead of carrying a separate adaptor for every waste pipe diameter. Always confirm that the receiving drainage system suits the type of wastewater entering it. Do not connect foul wastewater to a surface water drain.

Cutting the Universal Adaptor

First, check the outside diameter of the waste pipe. Next, identify the correct step on the adaptor. Cut only the required section with a sharp tool, keeping the cut level and free from tears. Do not cut past the required step. An oversized opening may prevent the adaptor from gripping and sealing around the waste pipe correctly.

Installing the 110mm Universal Adaptor

Clean the 110mm drainage socket, adaptor and waste pipe before assembly. Remove any dirt, grit or damaged material that could affect the connection. Apply a suitable silicone pipe lubricant where required. Then press the adaptor evenly into the drainage socket and insert the waste pipe through the trimmed opening. Finally, check that both connections sit firmly and evenly. Browse the complete 110mm underground drainage range for compatible pipes, fittings and drainage accessories. For general drainage requirements, refer to the UK Government’s Approved Document H: Drainage and Waste Disposal.