110mm Underground Drainage 90 degree Double Socket Access Bend

Description

Description

Access bend from Aquaflow for 110mm underground drainage systems. This 90 degree double socket fitting changes pipe direction while also providing a removable access point for inspection, rodding and maintenance. The access cap allows drainage rods or inspection equipment to enter the pipework when needed. This makes the fitting useful for blockage clearance, flow checks and routine maintenance without removing sections of underground drainage pipe. The double socket design connects to compatible 110mm underground drainage pipe and fittings. It is suitable for builders, groundworkers, plumbers and drainage installers working on foul water, surface water and general below ground drainage systems. Before fitting, check the drainage layout and make sure the access point will remain practical for future maintenance. Clean all pipe ends and seals before installation. For easier fitting, use a suitable silicone pipe lubricant on ring seal connections.

Access Bend Uses

• Changing direction in 110mm underground drainage pipework
• Providing rodding access at a bend
• Drain inspection and maintenance
• Blockage clearance in foul water drainage systems
• Surface water drainage installations
• Drainage repairs and alterations
• Domestic and trade groundwork jobs

Access Bend Key Features

• 110mm underground drainage access bend
• 90 degree bend design
• Double socket connection
• Removable access cap for inspection and rodding
• Terracotta underground drainage finish
• Aquaflow underground drainage fitting
• Suitable for foul and surface water drainage systems
• Product code to be confirmed by supplier

How to Use an Access Bend

First, plan the drainage run and choose a position where the bend and access point will be useful for future inspection or rodding. Next, cut and prepare the pipe ends where required. Make sure each pipe is cut square, chamfered and cleaned before fitting. Apply silicone pipe lubricant to the seals where required. Then push the pipework fully into each socket and check that the access fitting is seated securely.

Product Details

Brand Aquaflow Product Type 110mm underground drainage double socket access bend Application Underground drainage, inspection, maintenance, rodding access, foul water and surface water systems Nominal Size 110mm Angle 90° Connection Type Double socket Access Type Removable access cap Colour Terracotta / orange Material PVC-U / plastic underground drainage fitting Standard EN 1401 / BS EN 1401 system Browse more 110mm underground drainage pipe and fittings, or view the full Underground Drainage range. For easier fitting, use silicone pipe lubricant with this access bend and other 110mm drainage fittings. View the Kalsi Aquaflow Underground Drainage guide for official system information and installation guidance.