160mm Underground Drainage Pipe 6m Single Socket

Description

The 160mm underground drainage pipe 6m is a long single-socket pipe for compatible below-ground foul-water and surface-water drainage systems. This 160mm single socket drainage pipe provides a practical 6m underground drainage pipe length, combining durable 160mm PVC-U drainage pipe construction with the larger diameter required for suitable 160mm sewer pipe installations. The 6 metre length is particularly useful for longer straight drainage runs, helping reduce the number of joints required compared with shorter sections of pipe.

160mm Underground Drainage Pipe 6m

The 160mm underground drainage pipe 6m is designed for compatible non-pressure underground drainage and sewerage systems. Its 160mm nominal diameter makes it suitable for larger drainage runs used across domestic, commercial and groundwork installations.

Choosing 160mm Underground Drainage Pipe 6m

Choose the 160mm underground drainage pipe 6m where the drainage layout requires a long straight section of 160mm below-ground pipework. Using a 6m length can reduce the number of joints and separate couplers required over long drainage runs.

160mm Single Socket Drainage Pipe

The 160mm single socket drainage pipe has an integral socket at one end and a plain spigot end at the other. This allows another compatible pipe or fitting to connect directly into the socket using the push-fit ring-seal joint.

Connecting 160mm Single Socket Drainage Pipe

Before connecting the 160mm single socket drainage pipe, make sure the socket, ring seal and adjoining pipe end are clean and free from grit or damage. Use suitable underground drainage lubricant where required and push the prepared pipe end squarely into the socket without displacing the seal.

6m Underground Drainage Pipe

A 6m underground drainage pipe is useful on longer sections of drainage where reducing the overall number of joints can simplify installation. The longer length can be particularly useful across open trenches, commercial groundwork and larger drainage schemes.

Installing 6m Underground Drainage Pipe

Because a 6m underground drainage pipe is considerably longer than standard short pipe sections, make sure the full length is adequately supported during handling and installation. The pipe should be installed on suitable bedding and aligned correctly before backfilling.

160mm PVC-U Drainage Pipe

This 160mm PVC-U drainage pipe is intended for compatible non-pressure underground drainage applications. PVC-U is widely used for underground drainage because it is lightweight, corrosion resistant and easy to cut and joint on site.

160mm PVC-U Drainage Pipe Applications

The 160mm PVC-U drainage pipe can form part of suitable systems including:

• Foul-water underground drainage
• Surface-water drainage
• Rainwater drainage runs
• Domestic drainage systems
• Commercial groundworks
• Drainage extensions and repairs
• Larger underground drainage installations

160mm Sewer Pipe

A 160mm sewer pipe can be used as part of suitable gravity foul-water drainage and sewerage systems where this nominal pipe diameter is specified. The smooth internal bore helps maintain an unrestricted flow path when the system is installed at the correct fall.

Installing 160mm Sewer Pipe

When installing 160mm sewer pipe, maintain the required drainage fall and make sure the pipe is properly supported along its length. Inspection chambers and access fittings should be included where required by the drainage layout and installation specification.

Single Socket vs Plain Ended Drainage Pipe

A single-socket pipe has an integral push-fit socket at one end, while plain-ended pipe has a spigot at both ends. The integral socket can reduce the need for an additional straight coupler when connecting successive pipe lengths.

Push-Fit Ring Seal Connection

The socketed end is designed for push-fit jointing with compatible underground drainage components. Keep the sealing ring and adjoining pipe clean during installation and use appropriate drainage lubricant to minimise the risk of damaging or displacing the seal.

Cutting 160mm Underground Drainage Pipe

If the pipe needs shortening, make a square cut using suitable equipment and remove any burrs from the cut end. Chamfer the prepared spigot where required before inserting it into a socket. This helps protect the sealing ring during assembly.

Pipe Bedding and Support

Correct bedding and support are important when installing underground drainage pipe. The pipe should be evenly supported within the trench and installed in accordance with the drainage design, ground conditions and relevant installation requirements.

Foul-Water Drainage

The 160mm underground drainage pipe 6m can form part of compatible foul-water gravity drainage systems where 160mm pipework is specified. Correct falls, inspection access and jointing should be maintained throughout the complete drainage system.

Surface-Water Drainage

The pipe can also be used within compatible surface-water and rainwater drainage systems. The 6m format is particularly useful where the drainage route includes long straight runs between chambers, junctions or other fittings.

BS EN 1401 Underground Drainage

160mm PVC-U underground drainage pipes of this type are available within systems manufactured to BS EN 1401-1, the standard covering PVC-U piping systems for non-pressure underground drainage and sewerage. For further standards information, see the BSI BS EN 1401-1 certification reference.

160mm Underground Drainage Pipe 6m Applications

The 160mm underground drainage pipe 6m is suitable for compatible applications including:

• 160mm underground drainage systems
• Long straight drainage runs
• Foul-water drainage
• Surface-water drainage
• Rainwater drainage
• Domestic groundworks
• Commercial drainage installations
• Drainage alterations and extensions
• Gravity sewer systems

160mm Underground Drainage Pipe 6m Key Features

• Nominal diameter: 160mm
• Pipe length: 6 metres
• Single socket configuration
• One socket end and one plain spigot end
• Push-fit ring-seal connection
• PVC-U construction
• Suitable for compatible non-pressure gravity drainage
• Suitable for foul-water systems
• Suitable for surface-water systems
• Long length can reduce the number of joints required

Shop 160mm Underground Drainage

Browse our complete 160mm Underground Drainage range for bends, branches, couplers, access fittings, adaptors and additional pipe options. You can also browse the wider Underground Drainage range for additional pipe sizes, chambers, gullies and drainage fittings. The 160mm underground drainage pipe 6m combines a convenient 160mm single socket drainage pipe connection with a long 6m underground drainage pipe format, durable 160mm PVC-U drainage pipe construction and suitability for compatible 160mm sewer pipe applications.