110mm Underground Drainage 87.5° Double Socket Swept T Branch

Description

110mm T Branch for Underground Drainage

The T branch creates an 87.5° junction within compatible 110mm underground drainage systems. The Aquaflow EDUJDS87.5 is a double socket branch designed to connect an additional drainage run into the main underground pipework. The swept junction design provides a practical connection for foul water, surface water and general gravity drainage systems. Although fittings of this type are commonly described as 90° T branches, the manufacturer’s stated angle for this product is 87.5°.

T Branch Features

• 110mm nominal underground drainage size
• 87.5° junction angle
• Double socket configuration
• Swept T branch / junction design
• Push-fit underground drainage connections
• Terracotta underground drainage finish
• Suitable for gravity drainage and sewerage
• Suitable for foul and surface water systems
• Approx. 210mm stated length
• Approx. 128mm stated width
• Aquaflow product code EDUJDS87.5

Where to Use the T Branch

Use this fitting where an additional 110mm drainage run needs to connect into a main underground pipe at approximately 90°. Typical applications include:

• Foul water drainage systems
• Surface water drainage
• Domestic underground drainage
• Drainage extensions
• New groundwork installations
• Drainage repairs and alterations
• Connecting additional drainage runs

87.5° T Branch Angle

The EDUJDS87.5 is manufactured as an 87.5° junction. This is the correct technical angle even though fittings of this type are frequently referred to in the trade as 90° branches or tees. Using 87.5° in the product specification gives customers the exact product information while retaining 90° terminology within the search tags for customers who use the more common description.

Double Socket T Branch

This is the double socket version of the junction. It should not be confused with the EDUJTS87.5, which is the corresponding triple socket version. Check the existing drainage layout before ordering to make sure the double socket configuration is suitable for the required pipe connections.

Installing the T Branch

Establish the drainage route, direction of flow and required fall before installation. Where drainage pipe is cut on site, make the cut square and remove sharp burrs or rough edges. Clean the socket connections and sealing surfaces before assembly. Remove soil, grit and other debris that could interfere with the push-fit joints. Apply a suitable underground drainage lubricant where required and align each connection carefully before pushing the joint together.

Supporting the T Branch

Provide suitable bedding beneath the junction and surrounding drainage pipework. The fitting should form part of a correctly supported underground drainage system and should not carry the weight of unsupported pipes. Maintain the required fall through the drainage run and check all connections before completing the surrounding backfill.

Branch for Gravity Drainage

The Aquaflow underground drainage range is intended for gravity drainage and sewerage applications. This fitting is suitable for incorporating a secondary drainage run into compatible 110mm underground pipework. Correct orientation of the junction and appropriate pipe support are important for maintaining reliable drainage performance.

EDUJDS87.5 T Product Code

The correct product reference is EDUJDS87.5. Eurocell currently identifies this code as the Aquaflow 110mm 87.5° double socket underground drainage branch. The related EDUJTS87.5 product is the triple socket version and should not be confused with this double socket fitting.

Compatible 110mm Underground Drainage

Browse the complete 110mm underground drainage range for compatible pipes, bends, couplers and drainage fittings. For current product information, view the Aquaflow EDUJDS87.5 product information.