Description
Competa Double Socket T Branch for 110mm Underground Drainage
The
Competa double socket T branch is a competitively priced fitting for creating a near-right-angle junction within compatible underground drainage systems. This
110mm T branch allows an additional drainage run to connect into the main underground pipework using a practical double socket configuration. Designed as a strong-value option for everyday drainage work, this
double socket T branch is suitable for new installations, repairs and extensions. It provides a straightforward solution where a
90 degree T branch is required within compatible 110mm below-ground drainage pipework.
Product Features
- 110mm nominal underground drainage size
- 90° nominal branch configuration
- Double socket design
- T-shaped underground drainage junction
- Suitable for compatible 110mm underground drainage systems
- Suitable for foul and surface water drainage layouts
- Useful for new installations, extensions and repairs
- Terracotta / orange underground drainage finish
- Competitively priced Competa Drainage range
- Stated product standard: EN 1401
- Competa Drainage product code CUG4DSJ90
Where to Use This Underground Drainage Branch
This
underground drainage branch is designed for installations where an additional 110mm drainage run needs to connect into a main underground pipe at approximately a right angle. The fitting can be used within compatible foul water and surface water drainage layouts for new groundwork, extensions and general repair work. Typical applications include:
- Domestic foul water drainage
- Surface water drainage
- House extensions and alterations
- New underground drainage installations
- Replacement drainage pipework
- Connecting additional drainage runs
- General groundwork projects
90 Degree T Branch Connection
A
90 degree T branch is commonly used where a secondary drainage run needs to connect into a main underground drainage line at a near-right-angle junction. Plan the complete drainage layout before installation and establish the direction of flow through both the main run and incoming branch before making the final connections.
Double Socket T Branch Configuration
This fitting is a
double socket T branch. The socket configuration should be checked against the surrounding drainage pipework before ordering to make sure it matches the installation. The double socket version differs from the corresponding triple socket branch, so selecting the correct configuration can reduce the need for additional couplers or changes to surrounding pipework.
Installing the Competa Double Socket T Branch
Before installing the
Competa double socket T branch, check the drainage route, required fall and alignment of the main pipe and incoming branch. If drainage pipe needs to be cut on site, make the cut square and remove any sharp burrs or rough edges. Clean all jointing surfaces before assembly and use a suitable underground drainage lubricant where required. Align each connection carefully before making the joint. Avoid forcing pipework sideways into the fitting as this can affect the alignment of the complete drainage system.
Supporting the Underground Drainage Branch
The
underground drainage branch should form part of a correctly supported below-ground drainage installation. Provide suitable bedding beneath the junction and surrounding pipework. Maintain the required drainage gradient and inspect the connections before completing the surrounding backfill. Avoid placing sharp stones, rubble or other potentially damaging material directly against the fitting.
Competa Drainage for Cost-Effective Installations
The
Competa double socket T branch forms part of our competitively priced Competa Drainage range, selected to provide practical underground drainage fittings at a strong-value price point. It is particularly suitable for trade work, property extensions, drainage repairs and larger installations where material costs need to remain competitive without paying a premium purely for a major brand name.
Choosing the Correct 110mm T Branch
Before ordering a
110mm T branch, check the nominal pipe diameter, required branch angle and socket configuration. This product is the nominal 90°
double socket version. If the installation instead requires three socketed connections, choose the corresponding triple socket branch.
90 Degree T Branch for Drainage Repairs
The
90 degree T branch can also be useful when modifying an existing underground drainage layout or introducing an additional drainage connection during extension and refurbishment work. Always check that the existing drainage system is compatible and correctly supported before incorporating additional fittings.
Compatible 110mm Underground Drainage
Browse our complete
110mm underground drainage range for compatible pipes, bends, couplers, access fittings, rodding points and drainage accessories. For general UK guidance covering below-ground drainage and waste disposal, see
Approved Document H: Drainage and Waste Disposal.
