Description
Competa CUG4SSB30 Single Socket Bend for 110mm Underground Drainage
The
Competa CUG4SSB30 single socket bend is a competitively priced fitting for creating a controlled nominal 30° change of direction within compatible underground drainage systems. This
110mm single socket bend is suitable for new installations, extensions and drainage repairs where a relatively gentle adjustment to the pipe route is required. This
30 degree drainage bend forms part of the Competa Drainage range and provides a practical option where an
underground drainage bend is required within compatible pipework. The
110mm drainage bend is suitable for foul and surface water drainage layouts.
30° Single Socket Bend Features
- 110mm nominal underground drainage size
- 30° nominal bend angle
- Single socket configuration
- Suitable for compatible 110mm underground drainage systems
- Suitable for foul and surface water drainage layouts
- Useful for new installations, extensions and repairs
- Competitively priced Competa Drainage range
- Stated product standard: EN 1401
- Competa Drainage product code CUG4SSB30
Competa CUG4SSB30 Single Socket Bend
The
Competa CUG4SSB30 single socket bend provides a practical way to introduce a moderate change of direction into compatible 110mm below-ground drainage pipework. Its 30° angle is useful where a shallower directional change is preferred to a 45° or 90° bend while still providing more adjustment than a 12.5° or 15° fitting.
110mm Single Socket Bend
The
110mm single socket bend is designed for use with compatible underground drainage pipe and fittings. Its single socket configuration should be checked against the surrounding pipework before ordering. Single socket and double socket bends are used differently within a drainage installation, so choosing the correct connection arrangement can reduce the need for additional couplers or alterations.
30 Degree Drainage Bend
A
30 degree drainage bend creates a relatively gentle change of direction within an underground drainage run. It can be used when adjusting pipe alignment, routing drainage around an obstacle or forming part of a more gradual directional change. The 30° angle sits between the shallower 12.5° and 15° bends and the larger directional change provided by a 45° fitting.
Underground Drainage Bend Applications
This
underground drainage bend is suitable for compatible below-ground foul and surface water drainage installations where a nominal 30° change in pipe direction is required. Typical applications include:
- Domestic underground drainage
- Foul water drainage systems
- Surface water drainage systems
- House extensions and alterations
- New underground drainage installations
- Drainage repairs and replacements
- Pipe alignment adjustments
- General groundwork projects
Installing the 110mm Drainage Bend
Before installing the
110mm drainage bend, establish the required route, fall and alignment of the surrounding underground drainage pipework. Where drainage pipe is cut on site, make the cut square and remove any sharp burrs or rough edges before assembly. Clean the jointing surfaces and use a suitable underground drainage lubricant where required. Align the fitting correctly before completing the connection and avoid forcing the surrounding pipework sideways to compensate for incorrect positioning.
Supporting Below-Ground Drainage
The bend and surrounding pipework should be laid on suitable bedding and correctly supported as part of the complete underground drainage installation. Check the completed joints, drainage fall and pipe alignment before backfilling. Avoid placing sharp stones, rubble or other potentially damaging material directly against the fitting.
Competa Drainage for Cost-Effective Installations
The
Competa CUG4SSB30 single socket bend forms part of our competitively priced Competa Drainage range, providing a cost-effective fitting for everyday underground drainage work. It is particularly suitable for trade projects, house extensions, drainage repairs and general groundwork where practical drainage fittings are required while keeping material costs competitive.
Choosing the Correct 30° Bend
This product is the nominal
30° single socket version. Check both the required bend angle and socket configuration before ordering. For smaller directional adjustments, 12.5° and 15° bends are available. For larger changes of direction, 45° and 90° fittings can be used depending on the drainage layout.
Compatible 110mm Underground Drainage
Browse our complete
110mm underground drainage range for compatible pipes, bends, couplers, branches, access fittings, rodding points and drainage accessories. For general UK guidance covering below-ground drainage installations, see
Approved Document H: Drainage and Waste Disposal.
