Description
Competa CUG4SSB15 Single Socket Bend for 110mm Underground Drainage
The
Competa CUG4SSB15 single socket bend is a competitively priced fitting for creating a gentle nominal 15° change of direction within compatible underground drainage systems. This
110mm single socket bend is particularly useful where only a small adjustment to the route or alignment of the drainage pipework is required. This
15 degree drainage bend forms part of the Competa Drainage range and provides a practical option where an
underground drainage bend is needed for a shallow directional change. The
110mm drainage bend is suitable for compatible foul and surface water drainage layouts.
15° Single Socket Bend Features
- 110mm nominal underground drainage size
- 15° nominal bend angle
- Single socket configuration
- Suitable for compatible 110mm underground drainage systems
- Useful for gentle changes in pipe direction
- Suitable for foul and surface water drainage layouts
- Suitable for new installations, extensions and repairs
- Competitively priced Competa Drainage range
- Stated product standard: EN 1401
- Competa Drainage product code CUG4SSB15
Competa CUG4SSB15 Single Socket Bend
The
Competa CUG4SSB15 single socket bend provides a practical way to introduce a small change of direction into compatible 110mm below-ground drainage pipework. Its shallow 15° angle is particularly useful when adjusting pipe alignment without introducing the greater directional change created by a 30°, 45° or 90° bend.
110mm Single Socket Bend
The
110mm single socket bend is designed for use with compatible underground drainage pipe and fittings. Its single socket configuration should be checked against the surrounding drainage layout before ordering. Single socket and double socket bends are used differently within a drainage installation, so selecting the correct connection arrangement can reduce the need for additional couplers or changes to the surrounding pipework.
15 Degree Drainage Bend
A
15 degree drainage bend creates a shallow directional change within an underground drainage run. It can be used when pipework needs a small adjustment to achieve the required route or alignment. For larger changes in direction, 30°, 45° and 90° bends are also available depending on the drainage layout.
Underground Drainage Bend Applications
This
underground drainage bend is suitable for compatible below-ground drainage installations where a nominal 15° directional adjustment is required. Typical applications include:
- Domestic underground drainage
- Foul water drainage systems
- Surface water drainage systems
- Minor pipe alignment corrections
- House extensions and alterations
- New underground drainage installations
- Drainage repairs and replacements
- General groundwork projects
Installing the 110mm Drainage Bend
Before installing the
110mm drainage bend, establish the required route, fall and alignment of the surrounding underground drainage pipework. Where drainage pipe is cut on site, make the cut square and remove any sharp burrs or rough edges before assembly. Clean the jointing surfaces and use a suitable underground drainage lubricant where required. Align the fitting correctly before completing the connection and avoid forcing surrounding pipework sideways to compensate for incorrect positioning.
Supporting Below-Ground Drainage
The bend and surrounding pipework should be laid on suitable bedding and correctly supported as part of the complete underground drainage installation. Check the completed joints, drainage fall and pipe alignment before backfilling. Avoid placing sharp stones, rubble or other potentially damaging material directly against the fitting.
Competa Drainage for Cost-Effective Installations
The
Competa CUG4SSB15 single socket bend forms part of our competitively priced Competa Drainage range, providing a cost-effective fitting for everyday underground drainage work. It is suitable for trade projects, house extensions, drainage repairs and general groundwork where practical fittings are required while keeping material costs competitive.
Choosing the Correct 15° Bend
This product is the nominal
15° single socket version. Check both the required bend angle and socket configuration before ordering. For an even smaller adjustment, a 12.5° easy bend may be suitable. For greater directional changes, 30°, 45° and 90° fittings are also available within the 110mm underground drainage range.
Compatible 110mm Underground Drainage
Browse our complete
110mm underground drainage range for compatible pipes, bends, couplers, branches, access fittings, rodding points and drainage accessories. For general UK guidance covering below-ground drainage installations, see
Approved Document H: Drainage and Waste Disposal.
