Description
Kayflow UG1007 450mm Riser Seal for Inspection Chambers
The
Kayflow UG1007 450mm riser seal is a replacement sealing ring designed for compatible Kayflow 450mm inspection chamber systems. This
450mm manhole riser sealing ring helps form a secure joint between compatible chamber components while maintaining the integrity of the underground drainage installation. The
450mm inspection chamber riser seal is used as part of the Kayflow chamber assembly and should be fitted correctly whenever compatible risers are installed. This
inspection chamber sealing ring provides an important sealing component within the system, while the
Kayflow 450mm chamber seal is suitable for replacement, repair and new chamber installations.
Kayflow UG1007 450mm Riser Seal
The
Kayflow UG1007 450mm riser seal is the genuine sealing component specified by Kayflow for its compatible 450mm inspection chamber system. Kayflow lists UG1007 specifically as a riser seal for the 450mm base and recommends that the chamber sealing arrangement is used correctly to ensure the system performs as intended.
450mm Manhole Riser Sealing Ring
The
450mm manhole riser sealing ring sits within the compatible chamber joint to help create a secure connection between the chamber components. A correctly fitted seal helps prevent unwanted gaps at the joint and forms part of the complete chamber assembly alongside the base, risers and suitable cover and frame.
450mm Inspection Chamber Riser Seal
The
450mm inspection chamber riser seal is designed specifically for compatible Kayflow 450mm chamber components rather than being a generic underground drainage pipe seal. Always check the inspection chamber manufacturer and component size before ordering replacement seals, as chamber profiles and sealing arrangements can differ between systems.
Inspection Chamber Sealing Ring
An
inspection chamber sealing ring is an important component when joining chamber sections together. It helps maintain a properly assembled joint while allowing the chamber risers to build up towards the required finished surface level. Kayflow also specifies the use of silicone sealant when fitting the first riser to the manhole base and during subsequent riser-to-riser jointing.
Kayflow 450mm Chamber Seal
The
Kayflow 450mm chamber seal can be used during a new installation or as a replacement where an existing sealing ring has become lost, damaged or unsuitable for reuse. Do not install a damaged or distorted seal, as the chamber joint should be assembled using the correct compatible components.
Key Features
- Genuine Kayflow inspection chamber component
- Manufacturer product code UG1007
- Designed for compatible Kayflow 450mm inspection chambers
- Used within chamber riser sealing arrangements
- Rubber sealing ring
- Suitable for new installations and replacement work
- Compatible with Kayflow 450mm chamber system components
- Designed for underground drainage inspection chambers
- Kayflow manufacturer trade pack quantity: 10
Compatible Kayflow 450mm Inspection Chambers
The UG1007 forms part of Kayflow’s 450mm inspection chamber system, which includes:
- UG1005 450mm chamber base
- UG1014 450mm chamber base with 160mm main run
- UG1003 450mm chamber riser
- UG1001 round chamber cover and frame
- UG2001 square chamber cover and frame
- UG1007 riser sealing ring
The correct combination of components should be selected according to the drainage layout and required finished chamber depth.
Installing the 450mm Manhole Riser Sealing Ring
Before fitting the
450mm manhole riser sealing ring, make sure the chamber joint and seal are clean and free from soil, grit or other debris. Position the seal correctly within the compatible joint profile and check that it is not twisted, damaged or displaced before assembling the chamber components. Kayflow states that silicone sealant should also be used when fitting the first riser to the manhole base and for subsequent riser-to-riser joints.
Using the Seal Between Chamber Risers
The
450mm inspection chamber riser seal forms part of the jointing arrangement as additional risers are added to increase the depth of the chamber. Each chamber section should be seated correctly and remain aligned during assembly. Do not force misaligned risers together, as this may displace or damage the sealing ring.
Maximum 450mm Chamber Depth
Kayflow states that its 450mm inspection chamber system can be installed to a maximum depth of 1200mm when installed in accordance with the manufacturer’s guidance. The number of risers required will depend on the position of the chamber base and the required finished surface level.
Replacement Inspection Chamber Seal
If an existing
inspection chamber sealing ring is damaged, excessively stretched or missing, replace it with the correct compatible seal rather than attempting to reuse an unsuitable component. Keeping spare chamber seals can also be useful during installation where multiple chamber bases and risers are being assembled.
Kayflow Manhole Chambers and Accessories
Browse our Manhole Chambers range for compatible Kayflow bases, risers, covers, frames and inspection chamber accessories. You can also browse our underground drainage range for compatible pipework and fittings. For current manufacturer specifications, visit the
Kayflow 450 Inspection Chambers page.
