Description
The
VIPSeal VE030-38 flexible coupling is a versatile
32mm flexible pipe coupling for joining and repairing compatible plain-ended pipework. This
30-38mm flexible coupling is commonly used as a
32mm waste pipe connector and provides a practical
flexible PVC repair coupling for suitable waste, soil, vent and low-pressure drainage applications. The VE030-38 accepts compatible pipe outside diameters from 30mm to 38mm. Its flexible straight-coupling design makes it especially useful for basin waste repairs, alterations and maintenance work where a conventional rigid fitting is difficult to install.
VIPSeal VE030-38 Flexible Coupling
The
VIPSeal VE030-38 flexible coupling is the genuine product reference for this size within VIPSeal’s flexible PVC plumbing coupling range. The
VIPSeal VE030-38 flexible coupling is commonly described as a 32mm or 1¼ inch fitting, although actual pipe outside diameter should always be checked before installation.
Choosing the VIPSeal VE030-38 Flexible Coupling
Choose the
VIPSeal VE030-38 flexible coupling where both pipe outside diameters fall between 30mm and 38mm. Measure both pipe ends before ordering rather than relying solely on nominal descriptions such as 32mm or 1¼ inch, particularly where different pipe materials or older installations are being connected.
Installing the VIPSeal VE030-38 Flexible Coupling
Before fitting the
VIPSeal VE030-38 flexible coupling, clean both pipe surfaces and remove dirt, grease, burrs and damaged material. Position the coupling centrally across the joint and tighten both stainless-steel clamp bands evenly. Published data for the exact black version specifies a tightening torque of
6Nm.
32mm Flexible Pipe Coupling
The VE030-38 is commonly used as a
32mm flexible pipe coupling for compatible basin waste, cloakroom waste and other low-pressure pipework. A
32mm flexible pipe coupling provides greater tolerance than a rigid socket because it can accommodate compatible pipes throughout the stated 30–38mm outside-diameter range.
32mm Flexible Pipe Coupling Applications
The
32mm flexible pipe coupling is particularly useful for plumbing repair and refurbishment work where two plain-ended pipe sections need to be joined without rebuilding a larger section of the surrounding pipework.
30-38mm Flexible Coupling
The
30-38mm flexible coupling is selected according to actual pipe outside diameter. Both ends of this straight coupling cover the same stated diameter range. This makes the
30-38mm flexible coupling useful where compatible pipework has small variations in external dimension.
Selecting a 30-38mm Flexible Coupling
Both pipe ends should sit comfortably within the 30–38mm range. If either pipe is outside this range, select another coupling or stepped adaptor rather than forcing the VE030-38 onto unsuitable pipework.
32mm Waste Pipe Connector
The VE030-38 can be used as a
32mm waste pipe connector for compatible basin, cloakroom and general waste-pipe installations. A
32mm waste pipe connector of this type is particularly useful where existing pipework needs to be repaired, altered or joined and there is insufficient movement available to install a conventional rigid fitting.
Using a 32mm Waste Pipe Connector
When using the fitting as a
32mm waste pipe connector, confirm the actual pipe outside diameter and make sure the surrounding pipework is adequately supported before final tightening.
Flexible PVC Repair Coupling
The VE030-38 is manufactured as a
flexible PVC repair coupling for compatible low-pressure plumbing and drainage pipework. The
flexible PVC repair coupling provides a mechanical connection without solvent cement and is particularly useful during maintenance and refurbishment work.
Flexible PVC Repair Coupling Construction
The flexible PVC body conforms around compatible pipe surfaces while stainless-steel clamp bands secure the connection at both ends. This makes the
flexible PVC repair coupling a useful solution where a rigid system-specific fitting cannot easily be installed.
Pipe Repair and Maintenance
The VE030-38 can be used where a damaged section of compatible waste pipe needs to be removed and replaced with a short new length. Once clean, sound pipe ends have been prepared, the flexible coupling can bridge the joint and provide a practical mechanical connection.
Compatible Pipe Materials
Published exact-product information identifies the VE030-38 PVC coupling as suitable for compatible cast iron or plastic pipework, with the wider product family intended for flexible plumbing repair applications. Actual outside diameter and the intended operating conditions should always be checked before installation.
0.6 Bar Pressure Rating
The exact black VE030-38B product is published with a maximum pressure rating of
0.6 bar. This fitting is intended for suitable waste, soil, vent and low-pressure drainage applications rather than general high-pressure water services.
6Nm Tightening Torque
The published tightening torque for the VE030-38B flexible PVC coupling is
6Nm. Using a suitable torque-controlled tool helps both clamp bands to be tightened consistently around the pipework.
Working Temperature Range
The published constant working temperature range for the exact black VE030-38B product is
-10°C to +38°C. Applications outside these conditions should be checked for suitability before installation.
VE030-38 Repair Applications
The
VIPSeal VE030-38 flexible coupling can be useful for:
- 32mm basin waste pipe connections
- 1¼ inch waste pipe repairs
- Cloakroom basin alterations
- Joining compatible plain-ended pipe
- Replacing damaged pipe sections
- Waste and soil pipe alterations
- Low-pressure drainage repairs
- Connecting short replacement lengths
- Maintenance and refurbishment work
Straight Flexible Coupling Design
The VE030-38 is a straight coupling, meaning both connection ends cover the same 30–38mm outside-diameter range. If two pipes differ significantly in outside diameter, use a suitable reducing adaptor rather than treating this straight coupling as a reducer.
VIPSeal VE030-38 Flexible Coupling Key Features
- Genuine VIPSeal VE030-38 product reference
- Pipe outside-diameter range: 30–38mm
- Common nominal size: 32mm / 1¼ inch
- Straight flexible coupling design
- Flexible PVC construction
- Stainless-steel clamp bands
- 6Nm published tightening torque for black VE030-38B
- 0.6 bar published maximum pressure for black VE030-38B
- -10°C to +38°C published constant working temperature for black VE030-38B
- Suitable for compatible waste, soil, vent and low-pressure drainage applications
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible couplings, adaptors, reducers and specialist pipe repair fittings. The
VIPSeal VE030-38 flexible coupling provides a versatile
32mm flexible pipe coupling and
30-38mm flexible coupling for use as a practical
32mm waste pipe connector and dependable
flexible PVC repair coupling.
