Description
The
VIPSeal VE038-48 flexible coupling is a versatile
40mm flexible pipe coupling for joining and repairing compatible plain-ended pipework. This
38-48mm flexible coupling is commonly used as a
40mm waste pipe connector and provides a practical
flexible PVC repair coupling for suitable waste, soil, vent and low-pressure drainage applications. The VE038-48 accommodates compatible pipe outside diameters from 38mm to 48mm. Its flexible straight-coupling design is particularly useful for repairs, alterations and maintenance where a conventional rigid fitting is unsuitable or awkward to install.
VIPSeal VE038-48 Flexible Coupling
The
VIPSeal VE038-48 flexible coupling is the genuine product reference for this 38–48mm straight coupling within VIPSeal’s earlier flexible PVC sanitary coupling range. The
VIPSeal VE038-48 flexible coupling is commonly described as a 40mm or 1½ inch fitting, although actual pipe outside diameter should always be checked before installation.
Choosing the VIPSeal VE038-48 Flexible Coupling
Choose the
VIPSeal VE038-48 flexible coupling where both pipe outside diameters fall between 38mm and 48mm. Measure both pipe ends before ordering rather than relying entirely on nominal descriptions such as 40mm or 1½ inch, particularly when different pipe materials or older systems are being connected.
Installing the VIPSeal VE038-48 Flexible Coupling
Before fitting the
VIPSeal VE038-48 flexible coupling, make sure both pipe ends are sound and clean. Remove dirt, grease, burrs and loose material that could interfere with the flexible connection. Position the coupling centrally across the joint and tighten the stainless-steel clamp bands evenly. The surrounding pipework should also be adequately supported.
40mm Flexible Pipe Coupling
The VE038-48 is commonly used as a
40mm flexible pipe coupling for compatible waste, soil, vent and drainage pipework. A
40mm flexible pipe coupling provides more tolerance than a rigid socket because it can accommodate compatible pipe outside diameters throughout the 38–48mm range.
40mm Flexible Pipe Coupling Applications
The
40mm flexible pipe coupling is particularly useful for bathroom, kitchen, utility and general plumbing repair work where two compatible plain-ended pipes need to be joined without rebuilding a larger section of pipework.
38-48mm Flexible Coupling
The
38-48mm flexible coupling is selected according to actual pipe outside diameter. Both ends of this straight coupling cover the same stated diameter range. This makes the
38-48mm flexible coupling useful where compatible pipework has small variations in external diameter.
Selecting a 38-48mm Flexible Coupling
Both pipes should sit comfortably within the 38–48mm range. If either pipe is outside this range, select another VIPSeal coupling or stepped adaptor rather than forcing the VE038-48 onto unsuitable pipework.
40mm Waste Pipe Connector
The VE038-48 can be used as a
40mm waste pipe connector for compatible sink, bath, utility and other waste-pipe installations. A
40mm waste pipe connector of this type is especially useful where existing pipe needs to be repaired, altered or joined and there is insufficient movement available to install a conventional rigid socket.
Using a 40mm Waste Pipe Connector
When using the fitting as a
40mm waste pipe connector, confirm the actual outside diameter of the waste pipe and make sure the pipe run is correctly supported before final tightening.
Flexible PVC Repair Coupling
VE038-48 belongs to VIPSeal’s legacy flexible PVC sanitary coupling range and can be used as a
flexible PVC repair coupling for compatible plain-ended pipework. The
flexible PVC repair coupling provides a mechanical connection without requiring solvent cement, making it particularly useful during maintenance and refurbishment work.
Flexible PVC Repair Coupling Construction
The flexible body conforms around compatible pipe surfaces while stainless-steel clamp bands secure the connection at both ends. This makes the
flexible PVC repair coupling useful where a rigid system-specific fitting cannot easily be installed.
Pipe Repair and Maintenance
The VE038-48 can be used when a damaged pipe section needs to be removed and replaced with a short new length. Once clean, sound pipe ends have been prepared, the flexible coupling can bridge the joint and create a practical mechanical connection.
Waste, Soil and Vent Applications
Published exact-product information identifies VE038-48 for suitable waste, soil, vent and low-pressure drainage pipework. Typical applications include:
- 40mm waste pipe connections
- Sink waste repairs
- Bath waste repairs
- Utility waste pipework
- Joining compatible plain-ended pipes
- Replacing damaged pipe sections
- Soil and vent alterations where compatible
- Low-pressure drainage repairs
- Maintenance and refurbishment work
86mm Coupling Width
Legacy VIPSeal dimensional data lists VE038-48 at approximately
86mm wide. This compact overall width can be useful where a flexible repair connection needs to be installed within restricted pipework or a confined service area.
Straight Flexible Coupling Design
The VE038-48 is a straight coupling, meaning both connection ends cover the same 38–48mm outside-diameter range. If two pipes differ significantly in outside diameter, use a dedicated stepped adaptor rather than treating a straight coupling as a reducer.
Legacy VE Flexible Coupling Range
The VE038-48 belongs to VIPSeal’s earlier VE flexible PVC sanitary coupling range. It should therefore use specifications relevant to the VE product rather than automatically inheriting the material and operating specifications of newer VIPSeal EPDM VDC or VIPSealPlumb products.
VIPSeal VE038-48 Flexible Coupling Key Features
- Genuine VIPSeal VE038-48 reference
- Pipe outside-diameter range: 38–48mm
- Common nominal size: 40mm / 1½ inch
- Coupling width: approximately 86mm
- Straight flexible coupling design
- Legacy flexible PVC sanitary coupling
- Stainless-steel clamp bands
- Suitable for compatible waste, soil, vent and low-pressure drainage pipework
- Useful for joining and repairing plain-ended pipes
- Suitable for repair, alteration and refurbishment work
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible couplings, adaptors, end caps and specialist pipe repair fittings. The
VIPSeal VE038-48 flexible coupling provides a versatile
40mm flexible pipe coupling and
38-48mm flexible coupling for use as a practical
40mm waste pipe connector and dependable
flexible PVC repair coupling.
