Description
The
VIPSeal VE075-86 flexible coupler is a versatile
3 inch flexible pipe coupling for joining and repairing compatible plain-ended pipework. This
75-86mm flexible coupling is commonly used as a
75mm waste pipe connector and provides a practical
flexible drainage repair coupling for suitable low and non-pressure waste, drainage and plumbing applications. The
VIPSeal VE075-86 flexible coupler accepts compatible pipe outside diameters from 75mm to 86mm, making it useful where a rigid system-specific socket is unsuitable or where there is a small dimensional difference between the pipes being joined.
VIPSeal VE075-86 Flexible Coupler
The
VIPSeal VE075-86 flexible coupler is the genuine product reference for this size within VIPSeal’s earlier flexible sanitary coupling range. Published product data identifies the fitting as suitable for pipe outside diameters from 75mm to 86mm, with an approximate overall coupling width of 100mm.
Choosing the VIPSeal VE075-86 Flexible Coupler
Choose the
VIPSeal VE075-86 flexible coupler where both pipe outside diameters fall within the 75–86mm range. Always measure the actual outside diameter of both pipes before ordering rather than relying only on nominal descriptions such as 75mm or 3 inch.
Installing the VIPSeal VE075-86 Flexible Coupler
Before fitting the
VIPSeal VE075-86 flexible coupler, check that both pipe ends are sound, reasonably aligned and free from damage that could interfere with the joint. Clean dirt, grease and loose debris from the pipe surfaces, position the coupling centrally across the joint and tighten the securing hardware evenly.
3 Inch Flexible Pipe Coupling
The VE075-86 is commonly used as a
3 inch flexible pipe coupling for compatible waste, drainage and plumbing pipework. A
3 inch flexible pipe coupling can be particularly useful for repair work because the flexible body accommodates compatible pipe dimensions without requiring a rigid socket connection.
3 Inch Flexible Pipe Coupling Applications
The
3 inch flexible pipe coupling can be used for joining plain-ended pipe, adding replacement sections and making alterations where the pipe outside diameter falls within the stated VE075-86 range.
75-86mm Flexible Coupling
The
75-86mm flexible coupling provides useful tolerance across compatible pipe systems and can accommodate pipe outside diameters throughout its stated range. This makes the
75-86mm flexible coupling useful where slight dimensional differences make a conventional rigid fitting difficult to use.
Selecting a 75-86mm Flexible Coupling
Both connecting pipes should sit comfortably between 75mm and 86mm outside diameter. If either pipe falls outside this range, another coupling or adaptor size should be selected.
75mm Waste Pipe Connector
The VE075-86 can be used as a
75mm waste pipe connector where the actual pipe outside diameter falls within the coupling’s operating range. A
75mm waste pipe connector of this type can be useful for commercial waste systems, drainage repairs, maintenance work and compatible low-pressure installations.
Using a 75mm Waste Pipe Connector
When using the fitting as a
75mm waste pipe connector, check the actual pipe O/D rather than assuming that every nominal 75mm pipe has identical external dimensions.
Flexible Drainage Repair Coupling
The VE075-86 is particularly useful as a
flexible drainage repair coupling where part of an existing pipe run needs to be repaired or replaced. A
flexible drainage repair coupling can be fitted across compatible plain-ended pipes without needing a conventional rigid socket, making it useful for maintenance and refurbishment work.
Using a Flexible Drainage Repair Coupling
When using the fitting as a
flexible drainage repair coupling, remove the damaged pipe section and make sure the remaining pipe ends provide clean, sound sealing surfaces. Position the replacement section correctly, fit the coupling over the joint and secure it evenly before testing the completed pipework.
Flexible Drainage Repair Coupling for Replacement Pipework
The
flexible drainage repair coupling is especially practical where a short replacement pipe length needs to be introduced into an existing system and there is limited movement available in the surrounding pipework.
Low and Non-Pressure Pipe Applications
Published exact-product information describes VE075-86 as suitable for joining and repairing pipe in low and non-pressure systems. This makes it suitable for compatible waste, drainage and similar plumbing applications rather than general high-pressure water services.
Straight Flexible Coupling Design
VE075-86 is a straight coupling, meaning both ends are intended to accommodate the same 75–86mm pipe outside-diameter range. Where two pipes have significantly different outside diameters, a dedicated stepped adaptor coupling should be selected instead.
Stainless-Steel Securing Hardware
The coupling uses stainless-steel securing hardware to mechanically secure the flexible body around the compatible pipe surfaces. The mechanical connection also allows the fitting to be removed again if required during future repair or maintenance work.
100mm Coupling Width
Legacy VIPSeal size documentation lists the VE075-86 coupling at approximately 100mm wide. This should be considered where the fitting is being installed in a restricted space or where only a short exposed pipe section is available.
VIPSeal VE075-86 Flexible Coupler Applications
The
VIPSeal VE075-86 flexible coupler can be useful for:
- Joining compatible 75mm waste pipe
- Repairing damaged pipe sections
- Joining plain-ended pipes
- Connecting short replacement lengths
- Waste and drainage alterations
- Low-pressure plumbing repairs
- Maintenance and refurbishment work
- Applications where rigid fittings are difficult to use
Legacy VE Range
The VE075-86 belongs to VIPSeal’s earlier VE coupling range. Specifications from newer VIPSeal EPDM plumbing products should not automatically be applied to this product unless confirmed on the physical VE075-86 stock.
VIPSeal VE075-86 Flexible Coupler Key Features
- Genuine VIPSeal VE075-86 reference
- Pipe outside-diameter range: 75–86mm
- Common nominal size: 75mm / 3 inch
- Approximate coupling width: 100mm
- Straight flexible coupling design
- Suitable for joining and repairing compatible plain-ended pipe
- Suitable for low and non-pressure applications
- Stainless-steel securing hardware
- Useful for waste, drainage and plumbing repairs
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible couplings, adaptors, end caps and specialist pipe repair fittings. For current manufacturer information, see the official
VIPSeal Plumbing Range. The
VIPSeal VE075-86 flexible coupler provides a versatile
3 inch flexible pipe coupling and
75-86mm flexible coupling for use as a practical
75mm waste pipe connector and dependable
flexible drainage repair coupling.
