Description
The
VIPSeal VE059-039 flexible adaptor is a stepped
50mm to 32mm waste reducer designed for joining compatible plain-ended waste and low-pressure pipework of different sizes. Commonly used as a
2 inch to 1.25 inch adaptor, it provides a practical
flexible waste pipe reducer and versatile
stepped waste pipe adaptor for repairs, alterations and refurbishment work. The VE059-039 is designed to reduce compatible nominal 50mm / 2 inch waste pipework down to nominal 32mm / 1¼ inch pipework. Stainless-steel clamp bands secure each side independently, making the fitting particularly useful where a conventional rigid reducer is awkward to install.
VIPSeal VE059-039 Flexible Adaptor
The
VIPSeal VE059-039 flexible adaptor is the product reference used for this 50mm-to-32mm reducing connector within the earlier VIPSeal flexible plumbing range. The
VIPSeal VE059-039 flexible adaptor provides a mechanical connection between two differently sized plain-ended pipes without requiring solvent cement or a conventional rigid socketed reducer.
Choosing the VIPSeal VE059-039 Flexible Adaptor
Choose the
VIPSeal VE059-039 flexible adaptor where a compatible nominal 50mm pipe needs to transition down to compatible nominal 32mm pipework. Always measure the actual outside diameter of both pipes before installation. Nominal descriptions such as 50mm, 32mm, 2 inch and 1¼ inch do not guarantee that every pipe system has identical external dimensions.
Installing the VIPSeal VE059-039 Flexible Adaptor
Before installing the
VIPSeal VE059-039 flexible adaptor, make sure both pipe ends are structurally sound and clean. Remove dirt, grease, burrs and damaged material that could interfere with the connection. Position the stepped adaptor correctly between the two pipes, tighten the stainless-steel clamp bands evenly and make sure the surrounding pipework is properly supported before testing the completed installation.
50mm to 32mm Waste Reducer
The VE059-039 is commonly used as a
50mm to 32mm waste reducer where larger waste pipework needs to transition down to a smaller 32mm connection. A
50mm to 32mm waste reducer can be particularly useful for plumbing repairs and alterations where the existing pipes are already fixed in position and there is insufficient movement to fit a conventional rigid reducer.
50mm to 32mm Waste Reducer Applications
The
50mm to 32mm waste reducer can be useful for basin, utility, commercial waste and other compatible low-pressure pipework where two different nominal pipe sizes need to be connected. Actual pipe dimensions should always be checked before ordering.
2 Inch to 1.25 Inch Adaptor
The VE059-039 can also be described as a
2 inch to 1.25 inch adaptor, reducing compatible nominal 2 inch pipework down to nominal 1¼ inch pipework. A
2 inch to 1.25 inch adaptor is particularly useful when modifying an existing waste system without replacing the full pipe run.
Using a 2 Inch to 1.25 Inch Adaptor
When using the product as a
2 inch to 1.25 inch adaptor, confirm the actual external dimensions of both pipes rather than relying only on imperial size descriptions. Different pipe materials and older pipe systems can vary in outside diameter even when their nominal sizes appear equivalent.
Flexible Waste Pipe Reducer
The VE059-039 provides a practical
flexible waste pipe reducer for connecting compatible plain-ended waste pipework of different sizes. The
flexible waste pipe reducer can accommodate small differences in alignment and positioning that may make a rigid reducer difficult to install.
Flexible Waste Pipe Reducer for Repairs
A
flexible waste pipe reducer is particularly useful during maintenance and refurbishment work because it can create a mechanical transition between pipe sizes without requiring a larger section of the existing system to be dismantled. It can also be useful when replacing a damaged section of pipe or modifying an established waste-pipe layout.
Stepped Waste Pipe Adaptor
The VE059-039 is a
stepped waste pipe adaptor, meaning the two connection ends are deliberately manufactured for different pipe sizes. This differentiates the
stepped waste pipe adaptor from a straight flexible coupling, where both ends are intended for pipes of approximately the same diameter.
When to Use a Stepped Waste Pipe Adaptor
Use a
stepped waste pipe adaptor where a larger pipe genuinely needs to transition into a smaller pipe. If both pipes are approximately the same outside diameter, choose an appropriate straight flexible coupling instead.
Stainless-Steel Clamp Bands
The exact VE059-039 product is supplied with stainless-steel clamp bands that secure the flexible fitting independently around each pipe end. This mechanically clamped design is particularly useful for repair and alteration work where a solvent-welded connection is impractical.
Waste and Low-Pressure Pipe Applications
The
VIPSeal VE059-039 flexible adaptor is intended for suitable waste, soil, vent and low-pressure drainage applications. Typical uses include:
- Reducing 50mm waste pipe to 32mm waste pipe
- 2 inch to 1¼ inch pipe transitions
- Basin and sink waste alterations
- Utility waste pipe connections
- Commercial waste pipe repairs
- Joining compatible plain-ended pipes of different sizes
- Replacing damaged pipe sections
- Maintenance and refurbishment work
- Low and non-pressure pipe connections
Flexible Adaptor vs Straight Coupling
VE059-039 is a reducing adaptor rather than a straight flexible coupling. A straight coupling is designed for two pipes of similar outside diameter. VE059-039 should be chosen where its 50mm-to-32mm reducing configuration is actually required.
Measure Pipe Outside Diameter Before Ordering
Although this product is sold for nominal 50mm-to-32mm pipe connections, actual pipe outside diameter should always be checked before purchase. Older waste systems, imported pipework and different pipe materials can have external dimensions that differ from their nominal descriptions.
Legacy VE Flexible Adaptor Range
VE059-039 belongs to an earlier VIPSeal flexible adaptor range. Current VIPSeal plumbing adaptors now use VAC product references, so specifications from the modern VAC range should not automatically be applied to this legacy VE059-039 product. For that reason, unverified modern EPDM material specifications, operating temperatures and pressure figures have not been copied onto this listing.
VIPSeal VE059-039 Flexible Adaptor Key Features
- VIPSeal VE059-039 product reference
- Flexible stepped reducing adaptor
- Common nominal connection: 50mm to 32mm
- Common imperial connection: 2 inch to 1¼ inch
- Stainless-steel clamp bands
- Designed for compatible plain-ended pipework
- Suitable for waste, soil, vent and low-pressure applications
- Useful for repairs and pipe alterations
- Useful where rigid reducers are difficult to install
- Designed to transition between different pipe sizes
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible couplings, reducers, adaptors and specialist pipe repair fittings. For current manufacturer technical resources and flexible plumbing products, visit the official
VIPSeal Product Documentation library. The
VIPSeal VE059-039 flexible adaptor provides a practical
50mm to 32mm waste reducer and
2 inch to 1.25 inch adaptor, combining the benefits of a
flexible waste pipe reducer with a versatile
stepped waste pipe adaptor.
