Description
110mm Underground Drainage Pipe 6m
This
110mm underground drainage pipe from Kayflow comes in a 6m single socket length. The SN8 pipe suits foul water and surface water drainage systems. Its long length also helps reduce the number of joints needed on straight drainage runs.
Delivery & Collection
Only available for store collection or North East delivery. We cannot send this 6m pipe through standard parcel delivery. Kayflow makes this pipe from strong and lightweight PVC-U. Therefore, installers can handle, cut and fit it with standard underground drainage tools. The terracotta colour also makes the pipe easy to identify as below-ground drainage.
110mm Underground Drainage Features
- 110mm nominal pipe diameter
- 6-metre overall length
- Single socket push-fit connection
- SN8 ring stiffness rating
- Strong and lightweight PVC-U construction
- Suitable for foul water drainage
- Suitable for surface water drainage
- Terracotta/orange finish
- Long length reduces the number of joints needed
- Compatible with suitable Kayflow 110mm fittings
- Designed for systems tested to BS EN 1401-1
110mm Underground Drainage Specifications
| Brand | Kayflow |
|---|
| Product code | BUG4 |
|---|
| Product type | Underground drainage pipe |
|---|
| Nominal diameter | 110mm |
|---|
| Length | 6 metres |
|---|
| Connection | Single socket push-fit |
|---|
| Stiffness class | SN8 |
|---|
| Material | PVC-U |
|---|
| Colour | Terracotta/orange |
|---|
| Application | Foul and surface water drainage |
|---|
| Relevant standard | BS EN 1401-1 |
|---|
Where Can You Use This 110mm Underground Drainage Pipe?
Use this pipe for new drainage systems, extensions and repair work. For example, it suits domestic drainage, commercial groundworks and general below-ground pipework. You can use it for both foul water and surface water systems. The 6m length works especially well on long, straight drainage runs. Because the pipe covers more distance, it needs fewer joints than shorter lengths. As a result, it can simplify the layout and reduce the number of separate couplers required.
Installing 110mm Drainage
First, prepare the trench with the correct bedding and fall. Next, check that each pipe end remains clean and free from damage. If you cut the pipe, chamfer the new end before fitting it into a socket. Also, use a suitable drainage lubricant to protect the rubber seal. Finally, follow current Building Regulations and the requirements of the installation site. Correct bedding, jointing and backfilling will help protect the finished drainage system. Browse the complete
110mm underground drainage range for compatible bends, junctions, couplers and access fittings. For more system information, visit the
Kayflow underground drainage website.
