VIPSeal Flexible Tee 105–116mm | VET116

Description

The VIPSeal VET116 flexible tee is a versatile 105-116mm flexible tee designed for creating a 90° branch between compatible pipework. Commonly used as a 110mm flexible pipe tee, this flexible PVC drainage tee provides a practical 90 degree multifit tee for drain, soil, waste and vent pipe applications. The flexible construction allows the VET116 to connect across a useful pipe outside-diameter range rather than being restricted to one rigid pipe system. This makes it particularly useful for repairs, alterations and connections involving different pipe materials.

VIPSeal VET116 Flexible Tee

The VIPSeal VET116 flexible tee is the 105–116mm model within VIPSeal’s flexible PVC tee range. Its 90° branch configuration provides a convenient way to introduce a branch connection into compatible pipework without relying on a rigid system-specific tee. The VIPSeal VET116 flexible tee is suitable for pipe outside diameters from 105mm to 116mm and is therefore compatible with a range of common pipes where the measured outside diameter falls within that range.

Choosing the VIPSeal VET116 Flexible Tee

Select the VIPSeal VET116 flexible tee according to the actual outside diameter of the pipes being connected. Always measure or confirm the pipe O/D before installation rather than relying solely on nominal pipe size.

105-116mm Flexible Tee

The 105-116mm flexible tee provides a useful degree of tolerance where existing pipework does not match the exact dimensions of a conventional rigid fitting. Its flexible body allows the fitting to accommodate compatible pipes throughout the stated 105–116mm outside-diameter range, making the 105-116mm flexible tee useful for repairs and alterations involving older or mixed pipe systems.

Installing a 105-116mm Flexible Tee

Before fitting the 105-116mm flexible tee, check the outside diameter and condition of each pipe connection. Pipe surfaces should be clean and free from dirt, sharp edges and debris that could interfere with the fitting. Position the tee evenly over the pipe ends and tighten the securing bands progressively. The published tightening torque for this flexible PVC range is 6Nm.

110mm Flexible Pipe Tee

The VET116 is commonly suited to applications requiring a 110mm flexible pipe tee, provided the actual pipe outside diameter is within the 105–116mm fitting range. A 110mm flexible pipe tee can be especially useful where rigid 110mm fittings are unsuitable because of small differences in pipe outside diameter, pipe material or an existing installation.

110mm Flexible Pipe Tee Applications

The 110mm flexible pipe tee can be used in suitable drain, soil, waste and vent pipe installations where a 90° branch is required and all connection diameters fall within the VET116 operating range.

Flexible PVC Drainage Tee

The VET116 is manufactured as a flexible PVC drainage tee from high-quality thermoplastic flexible PVC. Unlike a rigid moulded PVC-U fitting, the flexible PVC drainage tee can accommodate a range of compatible outside diameters and pipe materials, making it a useful multifit solution for repair and alteration work.

Flexible PVC Drainage Tee Construction

The flexible PVC body provides the compliance required for the fitting to adapt around compatible pipework. External tightening bands secure the connections once the tee has been correctly positioned. This construction means the flexible PVC drainage tee can bridge differences between compatible pipes without requiring a separate rigid fitting for every material combination.

90 Degree Multifit Tee

The VET116 functions as a 90 degree multifit tee, providing a right-angle branch connection across compatible pipe materials and outside diameters. The 90 degree multifit tee is particularly useful where a branch needs to be introduced into an existing drainage, soil, waste or vent installation and rigid system-specific fittings are not practical.

Using a 90 Degree Multifit Tee

Before using the 90 degree multifit tee, confirm that each connecting pipe falls within the specified 105–116mm outside-diameter range. The fitting should be positioned without excessive strain or distortion before the bands are tightened.

Suitable Pipe Materials

The flexible VET range is intended as a multifit solution across a variety of common pipe materials. Published product information lists compatibility with suitable:

• Plastic pipe
• Cast iron pipe
• Ductile iron pipe
• Steel pipe
• Copper pipe
• Lead pipe

Actual pipe outside diameter remains the key selection measurement, regardless of material.

Drain, Soil, Waste and Vent Applications

The VIPSeal VET116 flexible tee is intended primarily for above-ground domestic and similar low-pressure pipe applications. Typical suitable uses can include:

• Soil pipe alterations
• Waste and drainage pipe repairs
• Vent pipe connections
• 90° branch additions
• Connections between compatible mixed pipe materials
• Older pipework where rigid fittings are difficult to match
• Repair and maintenance installations

Installation suitability should always be checked against the actual pipe material, diameter and intended operating conditions.

0.6 Bar Pressure Rating

Published technical information for this flexible PVC range gives a pressure rating of 0.6 bar / 8.7psi. The VET116 is intended for low-pressure drain, soil, waste and vent applications rather than high-pressure water systems.

6Nm Tightening Torque

The specified tightening torque for the VET flexible fitting range is 6Nm. Using a suitable torque-controlled tool helps the securing bands to be tightened consistently rather than relying purely on hand feel.

Working Temperature Range

The published constant working temperature range for this flexible PVC fitting range is -10°C to +38°C. Applications outside the stated working conditions should be checked with the manufacturer before installation.

VET116 Flexible Tee Compatibility

The key measurements and application points for the VIPSeal VET116 flexible tee are:

• Pipe outside-diameter range: 105–116mm
• Configuration: 90° tee
• Construction: thermoplastic flexible PVC
• Common application: approximately 110mm pipework
• Pressure rating: 0.6 bar / 8.7psi
• Tightening torque: 6Nm
• Constant working temperature: -10°C to +38°C
• Designed for compatible drain, soil, waste and vent pipe systems

Choosing the Correct Flexible Tee

Always choose a flexible tee according to the measured pipe outside diameter. VET116 covers 105–116mm pipework, while smaller VET sizes are available for smaller compatible pipe diameters. This is particularly important where older cast iron, metal or non-standard pipework is being connected to modern plastic systems.

VIPSeal VET116 Flexible Tee Key Features

• Genuine VIPSeal VET116 product reference
• 105–116mm pipe outside-diameter range
• 90° tee configuration
• Thermoplastic flexible PVC construction
• Suitable for compatible plastic and metal pipe materials
• Useful for drain, soil, waste and vent systems
• 0.6 bar / 8.7psi published pressure rating
• 6Nm published tightening torque
• -10°C to +38°C constant working temperature
• Flexible multifit design

Shop Flexible Pipe Connectors

Browse our Flexible Connectors range for flexible tees, elbows, couplings, adaptors and other specialist pipe connections. For information about VIPSeal’s current plumbing connector range, visit the official VIPSeal Plumbing Range. The VIPSeal VET116 flexible tee provides a versatile 105-116mm flexible tee for use as a 110mm flexible pipe tee, practical flexible PVC drainage tee and adaptable 90 degree multifit tee.