Description
The
VIPSeal VEL116 flexible elbow is a versatile
105-116mm flexible elbow designed to create a 90° change of direction between compatible pipes. Commonly used as a
110mm flexible pipe elbow, this
flexible PVC drainage elbow provides a practical
90 degree multifit elbow for compatible drain, soil, waste and vent installations. The flexible construction allows VEL116 to accommodate pipe outside diameters from 105mm to 116mm rather than being restricted to one rigid pipe system. This makes it particularly useful for repairs, alterations and mixed-material pipe connections.
VIPSeal VEL116 Flexible Elbow
The
VIPSeal VEL116 flexible elbow is the 105–116mm model within VIPSeal’s flexible PVC elbow range. Its 90° configuration allows pipework to change direction while accommodating a useful range of compatible pipe outside diameters. The
VIPSeal VEL116 flexible elbow can be particularly useful where an existing pipe does not precisely match a conventional rigid fitting or where different compatible pipe materials need to be connected.
Choosing the VIPSeal VEL116 Flexible Elbow
Select the
VIPSeal VEL116 flexible elbow according to the actual outside diameter of the pipes being connected. Both connection points should fall within the specified 105–116mm range. Always measure or confirm pipe O/D before installation rather than relying solely on nominal pipe size.
105-116mm Flexible Elbow
The
105-116mm flexible elbow gives installers greater tolerance than a rigid fitting designed around one exact pipe system. Its flexible body can accommodate compatible pipes throughout the stated outside-diameter range, making the
105-116mm flexible elbow useful for drainage repairs, soil-pipe alterations and older installations where pipe dimensions can vary.
Installing a 105-116mm Flexible Elbow
Before fitting the
105-116mm flexible elbow, check that both pipe ends are sound, correctly aligned and within the required outside-diameter range. Clean dirt, sharp edges and debris from the connection surfaces before positioning the elbow. Tighten the external securing bands progressively and evenly. Published technical information for this range specifies a tightening torque of
6Nm.
110mm Flexible Pipe Elbow
VEL116 is commonly suited to applications requiring a
110mm flexible pipe elbow, provided the actual outside diameter of the pipe falls within the 105–116mm range. A
110mm flexible pipe elbow can be useful where conventional rigid 110mm fittings are difficult to use because of slight differences in pipe diameter, pipe material or an existing installation.
110mm Flexible Pipe Elbow Applications
The
110mm flexible pipe elbow can be used in suitable drain, soil, waste and vent systems where a 90° change of direction is required between compatible pipes. Actual pipe outside diameter remains the key selection measurement even where the pipe is commonly described as 110mm or 4 inch.
Flexible PVC Drainage Elbow
The VEL116 is manufactured as a
flexible PVC drainage elbow using high-quality thermoplastic flexible PVC. Unlike a rigid moulded PVC-U bend, the
flexible PVC drainage elbow can accommodate a range of compatible outside diameters and pipe materials, making it useful for repair, maintenance and alteration work.
Flexible PVC Drainage Elbow Construction
The flexible PVC body provides the compliance needed for the fitting to adapt around compatible pipework. External tightening bands secure the connections once the elbow has been correctly positioned. This makes the
flexible PVC drainage elbow a useful multifit option where a rigid system-specific bend is unsuitable.
90 Degree Multifit Elbow
The VEL116 functions as a
90 degree multifit elbow, providing a right-angle change of direction across compatible pipe materials and outside diameters. The
90 degree multifit elbow is particularly useful where existing soil, waste, vent or drainage pipework needs to be redirected without relying on one particular rigid pipe system.
Using a 90 Degree Multifit Elbow
Before installing the
90 degree multifit elbow, confirm that both pipes fall within the stated 105–116mm outside-diameter range and that the fitting can be positioned without excessive strain or distortion. Support and align the surrounding pipework appropriately before final tightening.
Compatible Pipe Materials
Published product information describes the VEL flexible PVC range as suitable for connecting a variety of common pipe materials.
- Plastic pipe
- Cast iron pipe
- Ductile iron pipe
- Steel pipe
- Copper pipe
- Lead pipe
The actual pipe outside diameter should always be confirmed regardless of material.
Drain, Soil, Waste and Vent Applications
The
VIPSeal VEL116 flexible elbow is intended for compatible low-pressure pipe applications including drain, soil, waste and vent systems. Typical applications can include:
- Soil pipe repairs and alterations
- Waste pipe connections
- Vent pipe alterations
- 90° changes of direction
- Connections involving compatible mixed pipe materials
- Older pipe systems where rigid fittings are difficult to match
- Repair and maintenance installations
0.6 Bar Pressure Rating
Published exact-product information for the flexible PVC VEL range gives a pressure rating of
0.6 bar / 8.7psi. The fitting is intended for low-pressure drain, soil, waste and vent applications and should not be treated as a general high-pressure water fitting.
6Nm Tightening Torque
The published tightening torque for this flexible PVC range is
6Nm. Using a suitable torque-controlled tool helps ensure that the securing bands are tightened consistently around both pipe connections.
Working Temperature Range
The published constant working temperature range for the VEL flexible PVC range is
-10°C to +38°C. Applications outside these operating conditions should be checked for suitability before installation.
VEL116 Flexible Elbow Compatibility
The key characteristics of the
VIPSeal VEL116 flexible elbow are:
- Pipe outside-diameter range: 105–116mm
- Configuration: 90° elbow
- Material: thermoplastic flexible PVC
- Common application: approximately 110mm pipework
- Pressure rating: 0.6 bar / 8.7psi
- Tightening torque: 6Nm
- Constant working temperature: -10°C to +38°C
- Suitable for compatible drain, soil, waste and vent systems
Choosing the Correct Flexible Elbow
Choose VEL116 where both pipe outside diameters fall between 105mm and 116mm and a 90° change of direction is required. Smaller VEL sizes are available for smaller compatible pipe diameters, so the fitting should always be selected from measured outside diameter rather than nominal size alone.
VIPSeal VEL116 Flexible Elbow Key Features
- Genuine VIPSeal VEL116 product reference
- 105–116mm pipe outside-diameter range
- 90° elbow configuration
- Thermoplastic flexible PVC construction
- Suitable for compatible plastic and metal pipes
- Designed for drain, soil, waste and vent applications
- 0.6 bar / 8.7psi published pressure rating
- 6Nm published tightening torque
- -10°C to +38°C constant working temperature
- Flexible multifit design
Shop Flexible Pipe Connectors
Browse our
Flexible Connectors range for flexible elbows, tees, couplings, adaptors and other specialist pipe connections. For current manufacturer information, visit the official
VIPSeal Plumbing Range. The
VIPSeal VEL116 flexible elbow provides a versatile
105-116mm flexible elbow for use as a
110mm flexible pipe elbow, adaptable
flexible PVC drainage elbow and practical
90 degree multifit elbow.
