Kayflow drainage | Speedy Plastics Ltd https://www.speedy-plastics.co.uk Underground Drainage Soil & Waste Water Pipes & Fittings Distributor Tue, 04 Aug 2026 13:14:42 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0.2 159587051 110mm Underground Drainage Double Socket Slip Coupler | Kayflow | BUG12 https://www.speedy-plastics.co.uk/shop/underground-drainage-pipes-fittings/110mm-underground-drainage/110mm-underground-drainage-double-socket-slip-coupler-kayflow-bug12/?utm_source=rss&utm_medium=rss&utm_campaign=110mm-underground-drainage-double-socket-slip-coupler-kayflow-bug12 Tue, 04 Aug 2026 12:08:48 +0000 https://www.speedy-plastics.co.uk/?post_type=product&p=39677 The Kayflow BUG12 slip coupler connects two plain-ended sections of 110mm underground drainage pipe. Its double socket push-fit design can slide along the pipe, making it ideal for repairs and alterations. Continue reading →

The post 110mm Underground Drainage Double Socket Slip Coupler | Kayflow | BUG12 first appeared on Speedy Plastics Ltd.]]> 110mm Underground Drainage Double Socket Slip Coupler This Kayflow slip coupler connects two plain-ended sections of 110mm underground drainage pipe. Its double socket design contains a push-fit seal at each end. Product code BUG12. Unlike a standard coupler, the slip design does not use a fixed central stop. Therefore, the fitting can slide farther along the pipe during installation. This makes it especially useful when repairing an existing drainage run where the surrounding pipes cannot move apart.

Slip Coupler Features

  • Fits compatible 110mm underground drainage pipe
  • Double socket push-fit design
  • Slip-style fitting without a central pipe stop
  • Useful for repairs and alterations
  • Joins two plain-ended pipe sections
  • Sealing ring at both socket ends
  • Strong and lightweight PVC-U construction
  • Terracotta/orange underground drainage finish
  • Suitable for foul and surface water drainage
  • Part of the Kayflow 110mm underground system

110mm Slip Specifications

Brand Kayflow
Product code BUG12
Product type Double socket slip coupler
Nominal size 110mm
Connection type Double socket push-fit
Central stop No
Material PVC-U
Colour Terracotta/orange
Application Underground foul and surface water drainage
System standard BS EN 1401-1

When Should You Use a Slip Coupler?

A standard coupler works well when installers can move the pipe ends during assembly. However, this is often difficult on an existing buried drainage run. A slip coupler provides a practical solution because it can move fully along one pipe end. For example, use this fitting when replacing a damaged section of 110mm pipe. First, slide the coupler onto the existing pipe. Next, position the replacement section. Then slide the coupler back across the joint. As a result, both seals sit across the connected pipe ends. The fitting also suits drainage alterations where access is limited. In addition, it can help join plain-ended pipes when a normal stopped coupler would prevent correct positioning.

Installing the 110mm Coupler

Make sure each pipe end is clean, square and free from damage. If you cut the pipe, chamfer and deburr the new end before fitting. Also, mark the intended socket depth on each pipe so you can centre the coupler over the finished joint. Apply a suitable drainage lubricant to the seals and pipe ends. Then slide the fitting into position without disturbing the sealing rings. Finally, check that the coupler sits evenly across both pipe ends. Browse the complete 110mm underground drainage range for compatible pipes, bends, junctions and access fittings. Kayflow lists BUG12 within its official 110mm underground drainage system.The post 110mm Underground Drainage Double Socket Slip Coupler | Kayflow | BUG12 first appeared on Speedy Plastics Ltd.]]> 39677 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 https://www.speedy-plastics.co.uk/shop/underground-drainage-pipes-fittings/110mm-underground-drainage/110mm-underground-drainage-double-socket-coupler-kayflow-bug10/?utm_source=rss&utm_medium=rss&utm_campaign=110mm-underground-drainage-double-socket-coupler-kayflow-bug10 Tue, 04 Aug 2026 12:03:15 +0000 https://www.speedy-plastics.co.uk/?post_type=product&p=39675 The Kayflow BUG10 double socket coupler joins two plain-ended sections of 110mm underground drainage pipe. It features two push-fit sealed sockets and an internal central stop for accurate pipe positioning. Continue reading →

The post 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 first appeared on Speedy Plastics Ltd.]]> 110mm Underground Drainage Double Socket Coupler This Kayflow double socket coupler joins two plain-ended sections of 110mm underground drainage pipe. The push-fit sockets contain fixed rubber seals, while the central stop helps position both pipes correctly. Product code BUG10. Use this fitting when installing or extending a standard 110mm drainage run. It creates a secure connection without solvent cement. Therefore, installers can complete the joint quickly with suitable drainage lubricant and correctly prepared pipe ends.

Double Socket Coupler Features

  • Connects two plain-ended 110mm drainage pipes
  • Double socket push-fit connection
  • Central stop helps control pipe insertion
  • Fixed sealing ring at both socket ends
  • Strong and lightweight PVC-U construction
  • Terracotta/orange underground drainage finish
  • Suitable for foul water drainage
  • Suitable for surface water drainage
  • No solvent cement required
  • Part of the Kayflow 110mm underground system

110mm Double Socket Coupler Specifications

Brand Kayflow
Product code BUG10
Product type Double socket coupler
Nominal size 110mm
Connection type Double socket push-fit
Central stop Yes
Seal type Fixed rubber sealing rings
Material PVC-U
Colour Terracotta/orange
Application Underground foul and surface water drainage
System standard BS EN 1401-1

Where Can You Use a Double Coupler?

Use this fitting to connect two plain-ended pipes in a new or extended underground drainage system. For example, it can join two cut pipe sections or connect a plain-ended pipe to a compatible plain-ended fitting. The internal central stop provides a clear insertion point for each pipe. As a result, it helps keep the coupler centred across the completed joint. However, the stop prevents the fitting from sliding fully along the pipe. If you need to replace a damaged section within a fixed drainage run, use a slip coupler instead. The Kayflow BUG12 slip coupler has no central stop, so it can slide along the pipe during a repair.

Installing the Double Coupler

First, cut the pipe square and remove any sharp edges. Next, chamfer the pipe end to help it pass through the rubber seal. Also, clean the socket and check that each sealing ring remains correctly seated. Apply a suitable drainage lubricant to the pipe ends. Then push each pipe into the coupler towards the central stop. Follow the system manufacturer’s installation guidance and allow for pipe movement where required. Finally, install the completed drainage run with the correct bedding, gradient and backfill. Follow current Building Regulations and all site-specific drainage requirements. Browse the complete 110mm underground drainage range for compatible pipes, bends, junctions and access fittings. Kayflow lists BUG10 within its official 110mm underground drainage system.The post 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 first appeared on Speedy Plastics Ltd.]]> 39675 110mm Underground Drainage Pipe 6m Single Socket SN8 | Kayflow | BUG4 https://www.speedy-plastics.co.uk/shop/underground-drainage-pipes-fittings/110mm-underground-drainage/110mm-underground-drainage-single-socket-pipe-6-metres-sn-8/?utm_source=rss&utm_medium=rss&utm_campaign=110mm-underground-drainage-single-socket-pipe-6-metres-sn-8 Sat, 01 Aug 2026 22:10:37 +0000 https://www.speedy-plastics.co.uk/?post_type=product&p=39578 This Kayflow 110mm underground drainage pipe comes in a 6m single socket length with an SN8 stiffness rating. Use it for compatible foul water and surface water drainage systems.

Only available for store collection or North East delivery. Standard parcel delivery is not available for this 6m pipe.

  Continue reading →

The post 110mm Underground Drainage Pipe 6m Single Socket SN8 | Kayflow | BUG4 first appeared on Speedy Plastics Ltd.]]> 110mm Underground Drainage Pipe 6m This 110mm underground drainage pipe from Kayflow comes in a 6m single socket length. The SN8 pipe suits foul water and surface water drainage systems. Its long length also helps reduce the number of joints needed on straight drainage runs.

Delivery & Collection

Only available for store collection or North East delivery. We cannot send this 6m pipe through standard parcel delivery. Kayflow makes this pipe from strong and lightweight PVC-U. Therefore, installers can handle, cut and fit it with standard underground drainage tools. The terracotta colour also makes the pipe easy to identify as below-ground drainage.

110mm Underground Drainage Features

  • 110mm nominal pipe diameter
  • 6-metre overall length
  • Single socket push-fit connection
  • SN8 ring stiffness rating
  • Strong and lightweight PVC-U construction
  • Suitable for foul water drainage
  • Suitable for surface water drainage
  • Terracotta/orange finish
  • Long length reduces the number of joints needed
  • Compatible with suitable Kayflow 110mm fittings
  • Designed for systems tested to BS EN 1401-1

110mm Underground Drainage Specifications

Brand Kayflow
Product code BUG4
Product type Underground drainage pipe
Nominal diameter 110mm
Length 6 metres
Connection Single socket push-fit
Stiffness class SN8
Material PVC-U
Colour Terracotta/orange
Application Foul and surface water drainage
Relevant standard BS EN 1401-1

Where Can You Use This 110mm Underground Drainage Pipe?

Use this pipe for new drainage systems, extensions and repair work. For example, it suits domestic drainage, commercial groundworks and general below-ground pipework. You can use it for both foul water and surface water systems. The 6m length works especially well on long, straight drainage runs. Because the pipe covers more distance, it needs fewer joints than shorter lengths. As a result, it can simplify the layout and reduce the number of separate couplers required.

Installing 110mm Drainage

First, prepare the trench with the correct bedding and fall. Next, check that each pipe end remains clean and free from damage. If you cut the pipe, chamfer the new end before fitting it into a socket. Also, use a suitable drainage lubricant to protect the rubber seal. Finally, follow current Building Regulations and the requirements of the installation site. Correct bedding, jointing and backfilling will help protect the finished drainage system. Browse the complete 110mm underground drainage range for compatible bends, junctions, couplers and access fittings. For more system information, visit the Kayflow underground drainage website.The post 110mm Underground Drainage Pipe 6m Single Socket SN8 | Kayflow | BUG4 first appeared on Speedy Plastics Ltd.]]> 39578