110mm drainage coupler | Speedy Plastics Ltd https://www.speedy-plastics.co.uk Underground Drainage Soil & Waste Water Pipes & Fittings Distributor Tue, 04 Aug 2026 13:14:42 +0000 en-GB hourly 1 https://wordpress.org/?v=7.0.2 159587051 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 https://www.speedy-plastics.co.uk/shop/underground-drainage-pipes-fittings/110mm-underground-drainage/110mm-underground-drainage-double-socket-coupler-kayflow-bug10/?utm_source=rss&utm_medium=rss&utm_campaign=110mm-underground-drainage-double-socket-coupler-kayflow-bug10 Tue, 04 Aug 2026 12:03:15 +0000 https://www.speedy-plastics.co.uk/?post_type=product&p=39675 The Kayflow BUG10 double socket coupler joins two plain-ended sections of 110mm underground drainage pipe. It features two push-fit sealed sockets and an internal central stop for accurate pipe positioning. Continue reading →

The post 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 first appeared on Speedy Plastics Ltd.]]> 110mm Underground Drainage Double Socket Coupler This Kayflow double socket coupler joins two plain-ended sections of 110mm underground drainage pipe. The push-fit sockets contain fixed rubber seals, while the central stop helps position both pipes correctly. Product code BUG10. Use this fitting when installing or extending a standard 110mm drainage run. It creates a secure connection without solvent cement. Therefore, installers can complete the joint quickly with suitable drainage lubricant and correctly prepared pipe ends.

Double Socket Coupler Features

  • Connects two plain-ended 110mm drainage pipes
  • Double socket push-fit connection
  • Central stop helps control pipe insertion
  • Fixed sealing ring at both socket ends
  • Strong and lightweight PVC-U construction
  • Terracotta/orange underground drainage finish
  • Suitable for foul water drainage
  • Suitable for surface water drainage
  • No solvent cement required
  • Part of the Kayflow 110mm underground system

110mm Double Socket Coupler Specifications

Brand Kayflow
Product code BUG10
Product type Double socket coupler
Nominal size 110mm
Connection type Double socket push-fit
Central stop Yes
Seal type Fixed rubber sealing rings
Material PVC-U
Colour Terracotta/orange
Application Underground foul and surface water drainage
System standard BS EN 1401-1

Where Can You Use a Double Coupler?

Use this fitting to connect two plain-ended pipes in a new or extended underground drainage system. For example, it can join two cut pipe sections or connect a plain-ended pipe to a compatible plain-ended fitting. The internal central stop provides a clear insertion point for each pipe. As a result, it helps keep the coupler centred across the completed joint. However, the stop prevents the fitting from sliding fully along the pipe. If you need to replace a damaged section within a fixed drainage run, use a slip coupler instead. The Kayflow BUG12 slip coupler has no central stop, so it can slide along the pipe during a repair.

Installing the Double Coupler

First, cut the pipe square and remove any sharp edges. Next, chamfer the pipe end to help it pass through the rubber seal. Also, clean the socket and check that each sealing ring remains correctly seated. Apply a suitable drainage lubricant to the pipe ends. Then push each pipe into the coupler towards the central stop. Follow the system manufacturer’s installation guidance and allow for pipe movement where required. Finally, install the completed drainage run with the correct bedding, gradient and backfill. Follow current Building Regulations and all site-specific drainage requirements. Browse the complete 110mm underground drainage range for compatible pipes, bends, junctions and access fittings. Kayflow lists BUG10 within its official 110mm underground drainage system.The post 110mm Underground Drainage Double Socket Coupler | Kayflow | BUG10 first appeared on Speedy Plastics Ltd.]]> 39675